Joined: Feb 2012
Posts: 19,381
Likes: 5,527
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
What conditions will the bike see? IMO the reason to run full length cable housing is for contamination reduction. Otherwise I prefer segmented casing sections.
Is the caliper adjusting barrel directly on top of the chainstay or offset to one side a bit? If directly on top and the resulting casing bend being really tight I might look at pulley methods to route the cable out of the caliper and along the stay's top. If offset a bit I would consider having the casing below the stay, passing by it along the way up to the adjuster. Andy
__________________
AndrewRStewart