Regina valve.
From Wikipedia:

Regina

Regina Valve stemThe "Regina Valve" is very similar to the Presta and mostly used in Italy.[21][circular reference] The central threaded pin is so short that it does not protrude from the valve tube and therefore cannot be bent. In order to close the valve tightly, a small, loose nut is placed on this threaded rod with a diameter of only around 1.5 mm and screwed on by hand. A threaded rod is enough. By tightening the nut, the valve disc with the conical sealing body is pressed against the valve seat.

Rim drilling:⌀ 6.5 mm

Thread DIN 7756 • outside VG 6×32 •outside VG 5.2×24 at the upper end

Maximum pressure 15 bars.