Originally Posted by
abshipp
In this case,
genejockey and I are both talking about vintage road frames (IIRC the 56 he couldn’t get to fit was a Schwinn Circuit). I’m a solid size 58 in modern road or gravel but really need a 60cm or 61cm vintage frame. The problem I run in to is that vintage frames tend to get too long in the TT. I’m 6’2” as well but mostly leg.
Non RC Addict I could probably do a 56 since they’re so tall in the front end.
I'm around 6'2" as well but I've always had larger frames, 62, 63, and 64. I have to have the bar up high but even years ago when I could run the bar 4" below the saddle, I had a 63cm Landshark and a 64cm Tesch. Later, I had a 63cm CAAD5, but the TT was a bit long @60mm, iirc.
Now, I can't have the bar that low, so I want a tall head tube. I don't want an obscene stack of spacers or some contraption up there, so a 230mm head tube works. Some frames with that much head tube also have long top tubes. I would probably benefit from a custom frame.