Thread: Bent frame
View Single Post
Old 03-22-25 | 10:22 PM
  #2  
Andrew R Stewart's Avatar
Andrew R Stewart
Senior Member
Titanium Club Membership
10 Anniversary
 
Joined: Feb 2012
Posts: 19,344
Likes: 5,461
From: Rochester, NY

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

What timing WRT this recent thread Motobecane "Inexternal" brazing - Bike Forums

This Peugeot shows how well engineered these Inexternal joints are. Nice even deformation from the impact, pretty much as I would hope for. Possible ride home able if the tire clears the down tube

But I have very little experience bending these frames, so don't feel comfy about how these Inexternal joints get along with what one does when bending the frame back. Do you have any idea to what the OEM front center was? That would make getting close to OEM head angle a lot more likely. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Reply
2