Originally Posted by
Kontact
Grab the entire brake caliper in your hand, rotate it until isn't centered on the rim. If it rotates too easily, tighten the 5mm mounting bolt that attaches it to the frame.
Make sure you have the wheel fully seated up into the dropouts and the qr fully tight.
It doesn’t rotate easily. I centered it a few days ago after it did the same thing. I made sure there was the same space between the pads and rim on both sides.
I thought I had the wheel all the way up in the dropouts but since I did have it off then reinstalled it I will check that first.
Is there any situation that can cause the brake to rotate to one side?