View Single Post
Old 08-01-25 | 01:15 AM
  #113  
Doc Sharptail's Avatar
Doc Sharptail
Senior Member
 
Joined: Aug 2024
Posts: 753
Likes: 1,013
From: Winnipeg Canada

Bikes: '84 Raleigh Vector Mixte, '83 Motobecane Super Sprint, '71 Glider (Raleigh)

Originally Posted by ShannonM
The instructions were auf Deutsch, ja?

In further support of the "the rewind lever was the problem" theory, I'm now about 1/3d of the way through the roll. One hopes that my sacrifice of one roll of Tri-X will prove to be sufficient propitiation for the Camera Gods, and they'll let me play with, and learn from, this neat old Japanese rangefinder.

The exposure system is already causing some learnin' to happen. It's not TTL, so composition and exposure setting are orthogonal to each other. I've never used an exposure value system before. It's different, kind of like the difference between mens' and womens' pants sizing. The shutter speed and f-stop are oddly linked, through a "Shutter Speed Control Ring" that links the two, advancing one while simultaneously reducing the other so as to keep the same EV. As the name suggests, the idea was that the photographer would use this to set the shutter speed for motion or whatever, and the aperture would change in response. Sort of a primitive aperture priority system, but all mechanical. And, as if all that weren't weird enough, the "Shutter Speed Control Ring" hath not detents... it's continuous.

All this combines to make me think about exposure in a different way.

--Shannon
Nikon F and F2 had stepless mechanical shutter speeds between 1/125 and 1/2000 sec. The detents were there, but anywhere in the green numeral range could be set to perfectly align the match needle TTL system.

Working in the dark-room, and trying to learn the zone system will give a further appreciation of the EV system.

-D.S.

Last edited by Doc Sharptail; 08-01-25 at 01:21 AM.
Doc Sharptail is offline  
Reply