Joel,
0.06” is about 1.5mm. For 11s, this seems very close.
I have attached a photo of our setup. It’s a bit hard to see, but the arrow marks one of the chainring nuts. I can fit a 2mm Allen key between the nut and the chain. Clearly the spacing between my chainrings is larger, although it’s hard to measure accurately. All the 11s front derailleurs I’ve tried shift these rings perfectly. You might consider experimenting with chainring spacers. These are cheap and come in several thicknesses. I would add a 0.8mm or 1.0mm spacer set to move the inner chainring inboard slightly.
(Interestingly, the machined ramps of the wickwerks ring protrude nearly as much as the nuts. )