Joined: Apr 2003
Posts: 1,469
Likes: 0
From: Perlas ng Silanganan
Bikes: Custom Knolly Chilcotin Limited Edition Orange, Dartmoor Wish, KHS 7500, Custom built Specialized Camber, S-Works Road, Cannondale Trail mtb, Polini MTB
Geometry experiment: Final Specs.
About 1.5 or so months I was planning to build my own frame w/ my own specs. There were a lot of adjustments along the way as I did some experiments(on paper only).
Now I am finish building the frame and already applied the first coat(paint). I guess it is safe to say that these are the final specs..
Just for info. I am 5'6" tall and have a 76cm inseam.
Here are the final specs:
TopTube(c-c) 54cm
SeatTube(c-c) 47cm SeatTube angle: 74 deg.
DownTube(c-c) 59cm
Headtube length 12cm Headtube angle: 73 deg.
Chainstay (c-t) 41cm
Seatstay (c-t) 46cm
BB height 27cm
Standover height 73cm
Fork rake: 43mm LOOK HSC4
Wheelbase(using above) 97cm
Other specs:
Stem (c-c): 8cm @ 10deg (neg. rise)
Seatpost rise: 16cm (seatpost is machined so it can't be adjusted)
Below is a scaled(1/10) drawing..
Last edited by dexmax; 05-29-03 at 09:42 PM.