Originally Posted by cuda2k
Top - thanks for the tip bud! Riv's barcon pod is about $10 cheaper than the Kelly Takeoffs.
Now, do I keep this crank or swap for a more modern TruVative triple gearing with a 52 top ring and a smaller middle ring? This thing's 50/46/(small haven't counted it yet) setup is odd.
No problem, bro.
You're dealing with the same issues I did with my Triplecross build. I went with v-brakes mainly because the barset I bought had Dia-Compe 287V levers on it and I had a bucket of v-brake dump take-offs in the barn.
Speaking of Take-Offs, I like 'em, and I've used barcons for years (all three of my other running bikes have barcons).
Depending on how the rear is spaced, you might consider going 7-speed freewheel. The Shimano 11-28 will give you plenty of high gears with a 50. I have a 48-38-28 on the Miyata right now, but a 500CX 50-40-30 is en route. If it were me, I'd follow the Pastor's advise and keep your crank and replace the two inners with whatever suits your area and style.
Top