Originally Posted by serpico7
I applied it indoors with newspapers spread out and the windows open. Fumes are not overly noxious. I chose to err on the side of a light coating rather than risk getting Framesaver all over my apartment. Didn't bother removing the BB or fork. Just sprayed into seat tube, chainstays, seatstays, fork and was able to poke the nozzle into the opening of the top tube from inside the seat tube. After spraying, I taped the vent holes on the stays and fork, and stuffed a paper towel in the top of the seat tube, so the stuff wouldn't run out as the solvent evaporated.
Next time I overhaul the bike, I'll do a more thorough application.
You can also gain access by removing a bottle cage bolt and spraying through that hole. Gives you access to the downtube. No real need to remove the bb or fork.
Bob