Originally Posted by jur
Anybody have an opinion on using a 130mm hub on 135mm dropouts on my Al Swift?
My Surly fixed hub is 130mm. On my silver Swift with 132.5mm rear spacing, I put 1x1mm spacer on each side of the hub axle. On my blue Swift with 135mm rear spacing, I put 2x1mm spacers on each side of the axle. The advantage of a solid axle is you have that extra room to play with spacers. So long as you have equal spacers on each side of the axle, the chainline will go relatively unchanged. An extra 1mm spacer on the non-drive side will push the chainline .5mm outwards, and vice-versa.