Thanks Nightc1,

Last Sunday I got alot of strange looks when I passed a bike club road block (23 riders). They where riding alone at 20 mph as I pass them doing 26 mph. But they cought up to me at the next light. Two of them pulled up on eighter side of me and one ask if that was a Wal-Mart Denali bike. We talked and then when the light changed one ask if they could ride with me. I said yes and we took off. About 1 1/2 mile down the road I noticed that I was leaving them behind. So I slowed down to let them catch up. We road for about 10 miles doing the lead shuffle. Then I told them I did not want to be late for work and sped away. Nice guys once they got used to the ideal that I could out ride them on a Wal-Mart bike.

As for the seat. I know who makes them but it is a OEM part and you can only get them from Kent. Kent replaced mine after the nose got riped at no cost. That reminds me I am going to order 2 set of these Kenda Kwest 26mm tires from kent. I sent a e-mail to Kenda and asked if they sale the Kwest in the 26mm size. They said to get with Kent that the 26mm is an OEM part and you can only get them from them.

To position the seat in the correct position. You need to measure your inseam and times .88. So for me it's 35*.88=30.9 inches. That is 30.9 inches from the center of the axle on the bottom bracket to the top of the seat. That's just a guideline by the way, but it will be real close to where the seat needs to be.