I was having some serious play in the left crank of my other bike, and it turned out the square taper hole was deformed on the other bike. Since I wasn't going to use the cranks on this build anyway I just put them on my other bike, and good thing; they were steel and very heavy..
So now that the cranks were off I got to look at the bottom bracket, and it has one of those non-symmetrical spindles..
Bottom Bracket info:On the side it has stamped: 1.37"x24T FUJI
Length from end of threaded section to other end: 146.8 mm
Length from top of square taper section to other end: 123.8 mm
The drive side of the spindle is 6.35 mm longer than the left side
** I'm not using the most exact measuring devices
This is good news since it means I'll be able to put any I.S.O. BB in here... I'm still thinking about the next move..