OK so this is bit late in coming but I finally got access to a digi cam.
Technical Specifications
Blue = stock components Red = Upgrade parts
FRAME Specialized FSR technology, A1 Premium Aluminum butted frame, full sealed cartridge bearing pivots, disc compatible, disc and rim brake cable routing, 75-90mm adjustable travel, replaceable dérailleur hanger, two sets of water bottle bosses
REAR SHOCK Fox Float R, air spring and rebound adj., 6.0x1.25"
FORK Manitou Axel Super, 100 travel, rebound adj., alloy steerer Rock Shox Duke XC
HEADSET 1 1/8" threadless, black steel cups, loose ball bearings w/ seals Chris King No ThreadSet
STEM Aluminum, 10 degree rise, TIG welded, black
HANDLEBARS XC mid rise bar, butted 6061 alloy, 6 degrees upsweep, 9 degrees backsweep, 610mm width MAXM MX-5 Lo-rise composite
TAPE / GRIPS Specialized MTB grip, black, double density Kraton ODI "Rogue" Lock On grips
FRONT BRAKE Shimano M-420 linear pull Swapped for Avid Mechanical Disc /w Hope Gothic Rotor
REAR BRAKE Shimano M-420 linear pull Swapped for Avid Mechanical w/Hope Gothic Rotor
BRAKE LEVERS Avid AD-3, black
FRONT DÉRAILLEUR Shimano M-510 Deore, 34.9mm clamp, top pull Shimano XT Front Dérailleur (Top Swing) M750, 34.9mm clamp, top pull
REAR DÉRAILLEUR Shimano M-570 LX Shimano XT Mega-9 Rear Dérailleur SGS M-750
SHIFT LEVERS Shimano M-510 Deore, 9 speed Shimano XT Mega-9 Shifter Pod SL M750
CASSETTE Shimano HG-50 LX, 11/34 XT Cassette 11-34
CHAIN Shimano HG-53 SRAM PC-59
CRANKSET Specialized Strongarm II, square taper Truvativ Hussefelt Triple, ISIS Spline
CHAINRINGS 44Ax32Sx22S, 4 bolt, 104/64mm pattern, steel chainring bolts New rings are exactly the same.
BOTTOM BRACKET Shimano UN-25, 68mm shell width, 113mm spindle length Truvativ GIGAPIPE Team DH
PEDALS Shimano M-505 clipless Odyssey South Gate Soon to be TIME Control-Z
RIMS Mavic X139, 26", black, machined sidewalls Swapped for Rhyno Lytes w/ XT disc hubs built w/ 14ga spokes
FRONT TIRE Specialized Roll-X 26 x 2.0", Kevlar bead Vittoria Blue Ridge 26 x 2.1 Kevlar bead These were N.O.S. in my shop. They have the same tread pattern as the GEAX Sedona
REAR TIRE Specialized Roll-X 26 x 2.0", Kevlar bead Vittoria Blue Ridge 26 x 2.1 Kevlar bead
TUBES Specialized, schraeder valve
SADDLE Specialized Body Geometry technology, steel rails
SEAT POST Alloy, black, 30.9 x 350/400mm
SEAT BINDER Alloy collar with Q/R, 34.9mm clamp I.D., black Swapped out for the S-works style with the water bottle boss (thanks Waldo!)
NOTES Gore Ride-On cables for the brakes, Nervz Teflon cables for the shifters
Well that's my pride and joy. A good portion of the stock parts (read the entire drivetrain minus the front derailieur) went towards upgrading my commuter bike, which is listed over in the commuter section.
Quite a change from how I originally got it.
.
edit: corrected contrast 12/30/04
Last edited by Raiyn; 05-04-05 at 01:24 AM.