Originally Posted by
beeb
I have a couple powdercoating questions.
I got a quote to spray my 73 World Voyageur for $120. I'm trying to match the blue (it's Schwinn Opaque Blue or something close to that), but have to source the powder myself. How difficult is it to match powder and who (if anyone) can do it affordably (like $100 or less)? The shop's quote was $450 to match, mask, and spray so I stand to save a considerable amount by doing it myself.
The chrome seat/chainstays, headtube lugs, and forkblades are getting masked. Is there some sort of hi-temp tape I should use to keep it the masking safe in the oven?
I'd look for another shop if you can. Around here, I can get a frame stripped, masked and coated for $100-$150 depending on color. I've heard of folks getting all that done for $50 elsewhere. While NYC could be high, $450 is nuts and if you look around you can probably find someone that can do the entire job for a lot less, including masking, stripping and matching the color you want.
If you want a truly top-notch job, check out Spectrum in Colorado.
Finally, check
this thread for answers to most any powder coating question.