Thread: "track geometry but with 26x2.5 tires..."
View Single Post
Old 03-01-08 | 12:13 AM
  #38  
wroomwroomoops's Avatar
wroomwroomoops
Sir Fallalot
 
Joined: Jul 2006
Posts: 5,286
Likes: 17
Originally Posted by 04orgzx6r
http://www.bikeforums.net/showthread...5&page=1&pp=25

http://www.bikeforums.net/showthread...slick&page=258 About halfway down

(On His First Bike)
Frame: BH mtb Columbus Aelle OR
Fork: BH Jumper Alu. "spray home painted"
Front wheel: Shimano Alivio with Vuelta rim 36 holes
Rear Wheel: Kogswell 135mm. double fixed hub with Mavic rim 32 holes.
Tires: Ritchey Moby Bite 2.1
Rear Cog: EAI Steel 3/32" 16 teeths
Lockring: Dura Ace
Ring: Shimano 42 teeth 3/32".
Chain: Shimano XT 8s 3/32"
Cranckset: Shimano Alivio with 170mm EDR cranks.
Pedals: FPD clipless or OnOff platform
Headset: OnOff Intruder
Stem: Titec oversize 31,8
Barr: Deda Pista 31,8
Bar plugs: One Less Car "barplugs4u"
SeatStem: Kalloy alu. "spray home painted"
Seat: Selle Italia SLR
Front Light: Mini light under the stem
Back light: Blinky Jelly ring
Those links don't work.

So the tubing is Columbus Aelle, but I was wondering who makes the frame. I am pretty sure it's not custom-made - nobody would order a frame to be made from such entry-level tubeset.
wroomwroomoops is offline  
Reply
0