Still searching for an old hollow Stronglight cottered axle.

The one I need would be 132 mm long, and it would show this number stamped on the center.

The axle I seek should NOT have the letter "A" marked on the axle (as does the one seen in the photos)... those were made for British market Stronglight cranks. They have slightly different diameters (15.8 mm versus 16.0 mm. for the French version of the cranks) and were also intended for larger British sized cotter pins (9.5 mm.) which will not fit the smaller 9 mm. bores on my French pedal threaded Stronglight cranks.

Please send PM if you find one in fairly nice condition among your stash.
A bit of surface rust is alright... so long as the bearing races are not pitted or badly worn.

Thanks!

Here are a few photos: