Old 08-27-08 | 12:21 PM
  #13  
viros20
Senior Member
 
Joined: Mar 2007
Posts: 190
Likes: 1
Originally Posted by A.Winthrop
.
Hi,
.
Good question. My guess is BOTH Wolber and Araya 20As
are correct for 1987 as I've seen examples with both. My
'86 Ironman has Araya 20As; my early '88 Ironman "Expert" has
Wolbers. So maybe 1987 was a transition year?
.
The bottom line here is I'm not sure if one or the other
wheelset was standard and the Arayas were carry-overs from
'86. Both wheelsets are very nice, however, and if this
example has either set, the poster will be happy.
.
I just checked my brother-in-law's '87 Ironman Master specs
and his too are Wolber Super Champion Alpine 700C. So maybe
Araya 20As were holdovers from '86 that appeared on early
'87 models only, not sure.
.
My '86 Ironman has a complete Shimano 600EX groupset with
one exception, the Gran Compe brake levers! These are
original to this model and year, the Shimano 600EX calipers
notwithstanding.
.
The world of cycling is almost as strange as the cult of
cyclists. :-)
.
PS - The Wolber Super Champion and Araya 20A were similar
in weight and price, according to Frank Berto's 1988
Complete Guide to Upgrading Your Bike. Overall, however,
Berto rates the Wolber as a little better.
.

I currently have those woblers on my DS ironman expert cenutrion (105 group) They seem to go out of true alot, I originally wanted to rebuild my hubs and replace the rim with some open pros at my LBS but then realized that would cost as much as a new wheelset. Would I be able to fit say a new modern open pro wheel set with new ultegra FH-6600 hubs. The ones i see on sale online say they are spaced at 130mm could I make that work with a new 8speed cassette on my bike?

thanks
viros20 is offline  
Reply