Here's a Cambio Rino (Gardin Team) on Velospace.

EDIT - Using a Gerber Variable Scale and goniometer on the photo, I got the following angles and dimensions. The photo is in pretty decent profile to get fairly accurate measurements. Scaling was off the Open Pro rims which have a 622mm BSD. There is a little vertical distortion, so I used vertical rim measurement for vertical dimensions and horizontal rim measurement for horizontal dimensions.

HTA=77° (steep! -double checked)
STA=74°
Wheelbase=940mm
Seat tube (C-C)=56cm
Top tube (C-C)=54cm
Chainstay=400mm
BB Drop=60mm

YIKES! I plugged in the measurements I took off of the photo into BikeCAD. My guess is it would be very responsive and fun to ride, but could be tiring on longer rides. It sure looks like fun.

The photo appears to have been taken from the rear quarter as the front rim measured slightly smaller than the rear rim. This causes me to question the top tube length measurement; the bike may have a slightly longer top tube than the measurement I took off the Velospace photo. Because of this foreshortening, I tried to extrapolate the top tube length from the difference in sizes of the front and rear rims. Based on that, I'm inclined to think the frame is close to 56cm square, which also makes the wheelbase a little longer.

Here's the revised drawing that I suspect is pretty close to the geometry of the bike in the Velospace photo.