SLA are ther most easy to get batteries..they have the best Power--off the line..
===
My design is going to be lightweight..so far my first FRAME-design is coming in at about $$40.00(USD)/
===
I need to figure the FRONT FORK...assembly...
I have great rear brake set to work easily..
===
I might have to use a CHAIN DRIVE..no real problem..
===
Today I was working on the aero-dynamic design...
I was wondering about the strength..and the SEAT...
===
I figure I can create a FRAME--that is the Battery Compartment..for SLA..48-volts..
I want 1000-watts of power..
===
I've been looking at Gas Powered Scooter's for TIRES/Wheel combinations..
these are the nicest looking parts...Disc Brakes..
===
What I have come up with is a Hollow Design..
..which has the most strategic..re-inforcement...maintaining..Hollow-ness..
===
I figure aluminum...BLOCKS...in a TEE-form...useing perpendicular..stiff frame design...
===
Basically..a seat..that has the rider...perched..lightly...
===
More like a standing scooter...but finding the MOPED--dimensions for HEIGHT...
===
I actaully hope for no more than 25-MPH/...
my current Scooter..operates at near 6-MPH...sometimes I punch it for 15-MPH...
===
I know I can build this scooter..
1000-watts..
48-volts..
Lightweight..
REAR BRAKE..
4 X 12volt Battery's...
===
Much larger tires then you see on the consumer models..I use a 12.5 X 3 TIRE...
I want larger than that...
===
I'm more into BATT-separation...
I'll install 4-PORTS...
..each at 12-volts charging...6-amps..
===
I hope to start next month...
I'll keep a LOG..of Pictures...
and POST..some stuff/[end]