Originally Posted by
tatfiend
Not sure about CF bars. Unclear to me from your post as to whether the bar or brake levers are CF or both.
The levers are CF, but I'd like to upgrade to a CF bar. The problem is that I don't want to spend a lot of money on a bar only to find out it won't work.
Does anyone know what a typical wall thickness is for a CF bar (if there is a typical thickness at all)?
Originally Posted by
tatfiend
BTW seeing as how the external diameter of all MTB bars in the lever/shifter clamping area is the same, the OD at the stem has minimal influence on the ID at the end of the bar.
Well, typically bars with a 25.4mm stem clamp are 22.2mm at the lever/shifter.