View Single Post
Old 05-14-09 | 05:41 AM
  #7  
Psimet2001's Avatar
Psimet2001
I eat carbide.
Titanium Club Membership
20 Anniversary
 
Joined: Jan 2006
Posts: 21,677
Likes: 1,417
From: Elgin, IL

Bikes: Lots. Chapter2, Van Dessel, Giant, Trek, etc Dealers for BMC, Chapter2

Originally Posted by greenjeep
I'd like to keep the 12, at least. I wouldn't mind going up to an 11, but read on Sheldon's site about 11's needing the hyperglide-c or something. I wasn't sure if that was still true on a '93 ultegra cassette or not.

My thought was get an ultegra 9spd (12-25 or 27) and just leave out one of the rings. I've seen a couple on ebay for $45, seems the easiest, best way to stay with a higher quality and get the gearing.

5233.3 %391227.120.38.3 % 1325.018.87.7 % 1423.217.47.1 % 1521.716.313.3 % 1719.114.311.8 % 1917.112.821.1 % 2314.110.617.4 % 2712.09.0

Pulled this off sheldonbrown.com/gear and it shows the large jumps on the last two gears, just wasn't sure how that would ride.
No.

Go buy an 8 spd cassette. There are planty still available.
__________________
PSIMET Wheels, PSIMET Racing, PSIMET Neutral Race Support, and 11 Jackson Coffee
Podcast - YouTube Channel
Video about PSIMET Wheels

Psimet2001 is offline  
Reply