Thread: Doh! Brakes don't fit
View Single Post
Old 05-15-09 | 11:59 AM
  #15  
yepyep
Senior Member
 
Joined: Oct 2008
Posts: 264
Likes: 1
http://www.sheldonbrown.com/gloss_ra-e.html#recessed

"
  1. Use the short recessed nut, but don't put it through the back of the fork. Instead, push it up into the inside of the steerer from the bottom. You can reach a 5 mm Allen wrench in through the hole in the back of the fork, and poke the short caliper bolt in from the front.You may need to shorten the recessed nut slightly to get it to fit inside your steerer."
yepyep is offline  
Reply
0