Originally Posted by nashcommguy

Try a Sugino 103mm track bb from http://www.universalcycles.com. They're cheap...under 40.00 and they can be installed w/o any special tools. I used a straight screwdriver and a rubber mallet to install mine. Very carefully. Grease the threads then screw in the DS first until it stops. Then give it a couple of light taps w/t hammer/screwdriver combo on the teeth. In the direction of 'tightening' the unit. Then grease and screw in the nds until it stops. Then a couple of taps on the teeth...again in the direction of 'tightening' until the whole unit feels solid. Just make sure you clean and grease the frame threads before you install. Then mount your cranks tapping them w/t rubber mallet. Use Loctite-Red on your crank bolt threads...don't worry they'll come back out should the need arise.