Thread: Post Your Titaniums
View Single Post
Old 09-23-09 | 02:31 PM
  #1165  
lung's Avatar
lung
Ass Hatchet
 
Joined: Aug 2008
Posts: 711
Likes: 1
From: Western NC

Bikes: Felt FC custom | SRAM Force/Red mix.| RS80 Wheels | 3T Cockpit & Post.

Originally Posted by adriano
how did you go about repolishing the merlin?
I just added this info to my build thread, as well as the process for applying new decals.

Build thread:
 http://www.bikeforums.net/showthread.php?t=587489

Begin with "kitchen grade" pad (the green kind) for bad scratches. Then finish entire bike with the "grade A" kind (brown color). Cut into thin 1" strip. then quickly, briskly, and lightly buff over tubes up and down in a uniform pattern on the frame (around the tubes... not long ways). Do this for while. Eventually it will begin to look like a new frame. I also use steel wool super fine grade which is #0000. in between. Scotch brite, then steel wool, then finally scotch brite again. Got ithe steel wool and grade-a scotch brites at local hardware store. Once done... I hit it with a soaking of windex...wipe it down, then buff it with Pledge. Looks awesome. Go get a six-pack, make sure your not rushed, and spend a few hours. It pays off.
lung is offline  
Reply
0