New guy here. Found this forum looking for ideas for trailer brakes. Liked what I saw so decided to stay.

Anyway, here is my trailer, based on a design I found on the net.

Stats are:
Overall length: 96"
Deck length: 60"
Deck width: 38"
Track width: 32"
Hitch to wheel: 68"
Wheel size: 559mm (26X1.75)[from roadside collection on trash day]

I estimate that I could easily haul 350lb on this trailer, however I doubt that my legs would be up to the task!




Hitch is made from 3/4" square tubing with 5/16-18 bolts used as swivels between each section. Gives me full 3 axis movement between bike and trailer.





Close-up of the hitch.





Looking down on the hitch.





My "drop-outs". Made from 12ga aluminum salvaged from cabinets bought at an auction years ago.





Bottom view, showing full gusseting of the frame.





Fishplated the drawbar to deck connection.





The hitch attachment to the trailer.




Pulls really smooth, but I need to get rid of the knobbies. Makes a humming sound above 17mph.

Tried to take a corner too fast unloaded, and had a really fun experience. Inside wheel climbed the curb and flipped the trailer. Lifted my rear wheel just enough to break traction, and slid the back of the bike sideways. Interesting feeling when you aren't expecting it!

I'll be adding lights to the back of it, will post more pics after I make and install them. I'm working on a turn signal arraingement for the bike and trailer as well.

Any Questions?