This is what I bought. I still had to use some of my previous tools but I am loving the kit so far.
* AV-1 Axle Vise
* BBT-5 Bottom Bracket/ Cassette Lockring Tool for Campagnolo
* BBT-9 Bottom Bracket for 16 notch external bearing crankset systems
* BBT-18 Chainring Lockring/ Bottom Bracket Tool
* BBT-22 Cartridge Bottom Bracket Tool (for 20 tooth internal splines, such as ShimanoŽ, FSAŽ, etc.)
* BT-2 Fourth Hand Brake Tool
* BO-2 Bottle Opener
* CBW-1 8 and 10mm Open End Wrench
* CBW-4 9 and 11mm Open End Wrench
* CC-2 Chain Checker Chain Wear Indicator
* CCP-2 Crank Puller (square spindle type)
* CCP-4 Crank Puller (ISIS DriveŽ and ShimanoŽ Octalink type
* CCW-5 Crank Wrench 14mm socket / 8mm hex
* CM-5 Cyclone Chain Cleaner
* CN-10 Cable Cutter
* CNW-2 Chainring Nut Wrench
* CRS-1 Crown Race Setting System
* CT-3 Professional Screw Type Chain Tool
* DAG-1 Derailleur Alignment Gauge
* FR-5 Cassette Lockring Tool for ShimanoŽ and similar brands
* GP-2 Pre-Glued Patch Kit
* GSC-1 GearClean Brush
* HCW-4 36mm Box-End and Bottom Bracket Pin Spanner
* HCW-5 Double-Sided Bottom Bracket Lockring Tool
* HCW-15 32 and 36mm Laser Cut Headset Wrenches (two)
* HHP-2 Bearing Cup Press
* PAW-12 12-inch Adjustable Wrench
* PH-1 P-Handled Hex Wrench Set w/ Holder (7 Piece Set)
* PPL-2 PolyLube 1000 Grease (tub)
* PW-4 Professional Pedal Wrench
* RT-1 Headset Cup Remover
* SA-3 Heavy Duty Shop Apron
* SBC-1 Spoke, Bearing, and Cotter Gauge
* SCW-SET 13mm through 19mm Professional Shop Cone Wrench Set
* SD-0 Screwdriver- cross tip #0
* SD-3 Screwdriver- straight blade 3mm
* SD-2 Screwdriver- cross tip #2
* SD-6 Screwdriver- straight blade 6mm
* SG-6 Threadless Saw Guide
* SR-2 Professional Sprocket Remover
* SW-0 Professional Spoke Wrench
* SW-1 Professional Spoke Wrench
* SW-2 Professional Spoke Wrench
* TAP-7 3mm x 0.5 Tap For Rear Wheel Dropout Alignment Screws
* TAP-8 5mm x .8 Tap For Water Bottle, Toe Clip, Fender, and Rack Bosses
* TAP-9 6mm x 1.0mm Tap For Cantilever Brake Bosses
* TAP-10 10mm x 1.0mm Tap for Derailleur Hanger
* TB-2 Tire Boot
* TL-1 Tire Levers
* TL-10 Shop Tire Lever
* TNS-1 Threadless Nut Setter
* WAG-3 Wheel Alignment Gauge (Dishing Tool)
Looking on average $700 but a great investment if you can spring for it.