Question about a new fork...
#1
Newbie
Thread Starter
Join Date: Jan 2011
Location: Scottsdale, AZ
Posts: 2
Bikes: Windsor Clockwork
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Question about a new fork...
I am wanting to upgrade to a carbon fork on my 2009 Windsor clockwork road bike. I am confused on what size the new fork has to be? I'm looking at forks online and they have a 700c 50mm or like 45mm and I'm unsure what they mean with the mm measurement. Is that the tube diameter? Does anyone have any suggestions on forks?
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,034
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5955 Post(s)
Liked 2,861 Times
in
1,594 Posts
The steering tube diameter must match your old fork, either 1" or 1-1/8" so that's easy. If you have a threadless headset, just make sure the steerer is longer so you can cut it down. Thread forks must be sized closer.
Now for the 50 or 45mm dimension. That's probably the fork rake. Read this for an explanation. Try to match your original fork, but in most cases you won't notice a difference of 5mm.
Now for the 50 or 45mm dimension. That's probably the fork rake. Read this for an explanation. Try to match your original fork, but in most cases you won't notice a difference of 5mm.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#3
cab horn
Join Date: Jun 2004
Location: Toronto
Posts: 28,353
Bikes: 1987 Bianchi Campione
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Likes: 0
Liked 28 Times
in
20 Posts
The steering tube diameter must match your old fork, either 1" or 1-1/8" so that's easy. If you have a threadless headset, just make sure the steerer is longer so you can cut it down. Thread forks must be sized closer.
Now for the 50 or 45mm dimension. That's probably the fork rake. Read this for an explanation. Try to match your original fork, but in most cases you won't notice a difference of 5mm.
Now for the 50 or 45mm dimension. That's probably the fork rake. Read this for an explanation. Try to match your original fork, but in most cases you won't notice a difference of 5mm.
Thread
Thread Starter
Forum
Replies
Last Post
fodio
Mountain Biking
5
02-18-14 10:27 AM
CTa
Singlespeed & Fixed Gear
3
07-12-13 08:23 PM