Click in pedal? But it's not?
#26
Senior Member
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631
Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times
in
166 Posts
It sounds like your bottom bracket assembly is loose and has some play in it. IF it is a cartridge bottom bracket, remove the crank arms, and bottom bracket assemble, clean and regrease the threaded bottom bracket mounting parts, re-assemble the bottom bracket, reattach the crank arms, and test it out. If it is a loose ball bottom bracket, loosen the lockring, tighten the non-drive side cup to remove any play, and re-tighten the lockring. If this does not take care of the problem, might be time for a new cartridge bottom bracket assembly, or an overhaul if it is cup and cone.
#27
Senior Member
Thread Starter
Join Date: Sep 2012
Location: NW Arkansas, USA
Posts: 1,031
Bikes: 2015 Giant Roam 2 Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 91 Post(s)
Likes: 0
Liked 6 Times
in
4 Posts
Well, this is embarrassing.
I tightened everything. I tried 3 different pedals. I put Teflon tape on the pedal threads. I actually busted a brand new Click-R pedal tightening the end cap trying to get rid of the click. I had no one else to ride it to make sure I wasn't hearing things, it's an XL frame and my wife is a XS person. So I elected to take it into the shop and pay whatever I needed to pay to get it taken care of. it was driving me nuts!
I was fuming about not being able to ride and the wife said to dig up the old bike and ride it when I had it in the shop. So I pulled ot from the shed aired up the tires, lubed the chain and took it out. I had forgotten how much I disliked it compared to my new one. And I was greeted with the same click.
I must have a bone click in my foot or ankle that is clicking and that's what I heard. It sounded so mechanical. The pedal must amplify it some. I have a bit of neuropathy in my feet and lower legs. I could hear the click and feel it faintly but could not pinpoint where it was coming from. I think it's my foot because thinking back I noticed it got a lot louder when I started to use my new open toed sandals instead of my older close toed SPD shoes.
So thanks for all the suggestions!
I tightened everything. I tried 3 different pedals. I put Teflon tape on the pedal threads. I actually busted a brand new Click-R pedal tightening the end cap trying to get rid of the click. I had no one else to ride it to make sure I wasn't hearing things, it's an XL frame and my wife is a XS person. So I elected to take it into the shop and pay whatever I needed to pay to get it taken care of. it was driving me nuts!
I was fuming about not being able to ride and the wife said to dig up the old bike and ride it when I had it in the shop. So I pulled ot from the shed aired up the tires, lubed the chain and took it out. I had forgotten how much I disliked it compared to my new one. And I was greeted with the same click.
I must have a bone click in my foot or ankle that is clicking and that's what I heard. It sounded so mechanical. The pedal must amplify it some. I have a bit of neuropathy in my feet and lower legs. I could hear the click and feel it faintly but could not pinpoint where it was coming from. I think it's my foot because thinking back I noticed it got a lot louder when I started to use my new open toed sandals instead of my older close toed SPD shoes.
So thanks for all the suggestions!
#29
Mechanic/Tourist
That is both sad and hilarious.
#30
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I had a "click" in my mountain bike the other day. Similar to yours, would only happen when I pedaled with my right foot, etcl.
Turns out it was a "slightly too long" derailleur cable housing sticking out from the frame and hitting my foot. Yes, I can fix it, yes it's easy. I just tend to be so busy fixing other people's bikes that I don't often work on mine (especially for something so small.)
Turns out it was a "slightly too long" derailleur cable housing sticking out from the frame and hitting my foot. Yes, I can fix it, yes it's easy. I just tend to be so busy fixing other people's bikes that I don't often work on mine (especially for something so small.)
#31
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,906
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,929 Times
in
2,554 Posts
Well, this is embarrassing.
I tightened everything. I tried 3 different pedals. I put Teflon tape on the pedal threads. I actually busted a brand new Click-R pedal tightening the end cap trying to get rid of the click. I had no one else to ride it to make sure I wasn't hearing things, it's an XL frame and my wife is a XS person. So I elected to take it into the shop and pay whatever I needed to pay to get it taken care of. it was driving me nuts!
I was fuming about not being able to ride and the wife said to dig up the old bike and ride it when I had it in the shop. So I pulled ot from the shed aired up the tires, lubed the chain and took it out. I had forgotten how much I disliked it compared to my new one. And I was greeted with the same click.
I must have a bone click in my foot or ankle that is clicking and that's what I heard. It sounded so mechanical. The pedal must amplify it some. I have a bit of neuropathy in my feet and lower legs. I could hear the click and feel it faintly but could not pinpoint where it was coming from. I think it's my foot because thinking back I noticed it got a lot louder when I started to use my new open toed sandals instead of my older close toed SPD shoes.
So thanks for all the suggestions!
I tightened everything. I tried 3 different pedals. I put Teflon tape on the pedal threads. I actually busted a brand new Click-R pedal tightening the end cap trying to get rid of the click. I had no one else to ride it to make sure I wasn't hearing things, it's an XL frame and my wife is a XS person. So I elected to take it into the shop and pay whatever I needed to pay to get it taken care of. it was driving me nuts!
I was fuming about not being able to ride and the wife said to dig up the old bike and ride it when I had it in the shop. So I pulled ot from the shed aired up the tires, lubed the chain and took it out. I had forgotten how much I disliked it compared to my new one. And I was greeted with the same click.
I must have a bone click in my foot or ankle that is clicking and that's what I heard. It sounded so mechanical. The pedal must amplify it some. I have a bit of neuropathy in my feet and lower legs. I could hear the click and feel it faintly but could not pinpoint where it was coming from. I think it's my foot because thinking back I noticed it got a lot louder when I started to use my new open toed sandals instead of my older close toed SPD shoes.
So thanks for all the suggestions!
Thanks for posting, This was a fun thread. And a lot of good information was shared here.
Ben
#32
makn'a phonecall to doggy
Join Date: Jun 2002
Location: The blue suit.
Posts: 489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lube the seatpost & collar/clamp parts.
My sled was a everlovin' click factory "at the 3 o'clock" position and others too. Chased it all around, up and down, miles and miles of frown. Finally did the seat bits and....
Well, let's just say it got better.
Might help. Won't hurt.
Sorry 'bout your foot thing.
My sled was a everlovin' click factory "at the 3 o'clock" position and others too. Chased it all around, up and down, miles and miles of frown. Finally did the seat bits and....
Well, let's just say it got better.
Might help. Won't hurt.
Sorry 'bout your foot thing.
#33
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,841
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 808 Post(s)
Liked 710 Times
in
379 Posts
So it's one of those d*** OEM parts! Those parts were were born with. Sad thing is that it is so expensive to get high quality 3rd party stuff to correct the issues. (I've been nursing my OEM knees along the past 36 years. Hope to get a few more out of them.)
Thanks for posting, This was a fun thread. And a lot of good information was shared here.
Ben
Thanks for posting, This was a fun thread. And a lot of good information was shared here.
Ben
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
Thread
Thread Starter
Forum
Replies
Last Post
cliffbar
Bicycle Mechanics
20
11-17-10 07:24 PM