Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Drivetrain cleaning

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Drivetrain cleaning

Thread Tools
 
Search this Thread
 
Old 01-09-18 | 10:06 AM
  #76  
sweeks's Avatar
Senior Member
20 Anniversary
Community Builder
 
Joined: Sep 2004
Posts: 3,292
Likes: 1,039
From: Chicago area

Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"

Originally Posted by cyccommute
All those attributes apply to mineral spirits as well. On the plus side, it evaporates much faster and more cleanly than kerosene. Kerosene isn't that volatile.
This is probably "6 of one, half dozen of another" territory. Both solvents work. The lower volatility of kerosene isn't a huge drawback, as kerosene has some lubricating qualities. Higher volatility may predispose to a greater fire hazard under some circumstances. I can see your point though.

Originally Posted by cyccommute
I would caution against WD-40. It's not the solution that's the problem, it's the added mineral oil that you don't really need. WD-40 is just mineral spirits with about 25% mineral oil added to it. Using straight mineral spirits just cuts out the unnecessary bits.
As I said, I prefer kerosene, but I have a gallon (literally, in a can) of WD-40. It works as an acceptable alternative.

Can we still be friends?
Steve
sweeks is offline  
Reply
Old 01-09-18 | 10:20 AM
  #77  
cmcanulty's Avatar
Full Member
 
Joined: Dec 2006
Posts: 428
Likes: 4
One thing I learned with the paraffin mix is pour a little into a small can and use that to brush on chain. Keeps the main supply nice and clean.
cmcanulty is offline  
Reply
Old 01-09-18 | 10:43 AM
  #78  
Senior Member
 
Joined: Feb 2009
Posts: 6,660
Likes: 177
for Andrei Description

RACING SPRAY WHITE is a white, solvent-containing, grease-based and adhesive semi-synthetic chain lubricant for the lubrication of bike chains (roller chains). After the evaporation of the solvent a stringy and adhesive grease remains which is not centrifuged or washed off. The white solid lubricants result in an excellent wear protection.
davidad is offline  
Reply
Old 01-10-18 | 09:59 AM
  #79  
cyccommute's Avatar
Mad bike riding scientist
Titanium Club Membership
20 Anniversary
Community Builder
Community Influencer
 
Joined: Nov 2004
Posts: 29,152
Likes: 6,211
From: Denver, CO

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Originally Posted by sweeks
This is probably "6 of one, half dozen of another" territory. Both solvents work. The lower volatility of kerosene isn't a huge drawback, as kerosene has some lubricating qualities. Higher volatility may predispose to a greater fire hazard under some circumstances. I can see your point though.



As I said, I prefer kerosene, but I have a gallon (literally, in a can) of WD-40. It works as an acceptable alternative.
The flash point of both solvents is similar. I suggest mineral spirits over kerosene (or diesel) simply because evaporates more cleanly. I'd rather that the lubricant does the lubricating rather than the solvent. There are some other drawbacks that someone unfamiliar with solvent properties could encounter as well...say using kerosene to clean a brake rotor.

WD40 suffers from the same problem only worse.

Originally Posted by sweeks
Can we still be friends?
Steve
Sure. I may disagree with someone but it's never...well, seldom...personal. I may know a lot of stuff but I'm still willing to learn.
__________________
Stuart Black
Dreamin' of Bemidji Down the Mississippi (in part)
Plan Epsilon Around Lake Michigan in the era of Covid
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!





cyccommute is online now  
Reply
Old 01-10-18 | 12:46 PM
  #80  
sweeks's Avatar
Senior Member
20 Anniversary
Community Builder
 
Joined: Sep 2004
Posts: 3,292
Likes: 1,039
From: Chicago area

Bikes: Airborne "Carpe Diem", Motobecane "Mirage", Trek 6000, Strida 2, Dahon "Helios XL", Dahon "Mu XL", Tern "Verge S11i"

Originally Posted by cyccommute
The flash point of both solvents is similar. I suggest mineral spirits over kerosene (or diesel) simply because evaporates more cleanly.
This makes sense. I have limited experience with mineral spirits, so I defer to your expertise.
Steve
sweeks is offline  
Reply
Old 01-16-18 | 06:23 AM
  #81  
Thread Starter
Senior Member
 
Joined: Feb 2015
Posts: 136
Likes: 0
From: Cheltenham
Mineral spirits

Does anyone know a good place to buy mineral spirits in the UK? [MENTION=1295]cyc[/MENTION]cocommute recommended it, and the closest possibility for me was an art supply shop; they did have a non-noxious fluid for paint cleaning, but the large bottle cost about £50. Is this more of a house painting product?
mfcity is offline  
Reply
Old 01-16-18 | 07:13 AM
  #82  
Racing Dan's Avatar
Senior Member
10 Anniversary
 
Joined: Aug 2015
Posts: 2,332
Likes: 373
Originally Posted by mfcity
Does anyone know a good place to buy mineral spirits in the UK? [MENTION=1295]cyc[/MENTION]cocommute recommended it, and the closest possibility for me was an art supply shop; they did have a non-noxious fluid for paint cleaning, but the large bottle cost about £50. Is this more of a house painting product?
Watch out for the naming conventions. Similar sounding names is used for different chemicals and different names are used for the same chemical, depending on your particular country. its a complete mess. It seems, what is called mineral spirits in the US is called white spirit in the UK(!). You may be able to get it in the supermarket, auto parts store, home improvement market, paint store ect.
Racing Dan is offline  
Reply
Old 01-16-18 | 08:40 AM
  #83  
cyccommute's Avatar
Mad bike riding scientist
Titanium Club Membership
20 Anniversary
Community Builder
Community Influencer
 
Joined: Nov 2004
Posts: 29,152
Likes: 6,211
From: Denver, CO

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Originally Posted by mfcity
Is this more of a house painting product?
Yes, just about anywhere that sells house paint should have mineral spirits. You might find them under "white spirits" in the UK. Homehardwaredirect lists them that way. Just about any hardware store should have it.
__________________
Stuart Black
Dreamin' of Bemidji Down the Mississippi (in part)
Plan Epsilon Around Lake Michigan in the era of Covid
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!





cyccommute is online now  
Reply
Old 01-17-18 | 06:44 AM
  #84  
J.Higgins's Avatar
2-Wheeled Fool
 
Joined: Sep 2016
Posts: 2,346
Likes: 680
From: New Hampshire

Bikes: Surly Ogre, Brompton

Originally Posted by davidad
https://thelashop.com/products/jewel...nt=45219195210
Clean ever 800 mile and relube with a mix of mineral spirits and chainsaw bar oil.
I have the 3L version of this very same cleaner, and I consider it barely large enough. It does a fantastic job, though. I keep a spare chain always clean and waxed, no no real down time.

I also keep a one-gallon steel paint can full of mineral spirits. You can get one of these generic cans at any good paint or hardware store. If I fill it 1/3rd full, I can slosh around a few greasy parts and clean them up real good. Sometimes I can throw a seriously-pooey chain in there before tossing it in the ultrasonic.
J.Higgins is offline  
Reply
Old 01-17-18 | 06:48 AM
  #85  
J.Higgins's Avatar
2-Wheeled Fool
 
Joined: Sep 2016
Posts: 2,346
Likes: 680
From: New Hampshire

Bikes: Surly Ogre, Brompton

Originally Posted by cyccommute
I suggest mineral spirits over kerosene (or diesel) simply because evaporates more cleanly.
Not to mention that the odor from mineral spirits is tolerable. Kerosene stinks! Its hard to get the smell off your hands or your clothes.
J.Higgins is offline  
Reply
Old 04-19-18 | 11:11 AM
  #86  
Thread Starter
Senior Member
 
Joined: Feb 2015
Posts: 136
Likes: 0
From: Cheltenham
Thanks!

Well, just a late thank you to [MENTION=21724]cyccommute[/MENTION] and everyone else for the tips. I was happy to find a white spirit equivalent called Clean Spirit at the local paint shop (for only £3 for a big bottle), soaked the chain in it for a couple of days and find it came out really clean.
The weather is also suddenly so sunny here that I am about to finally lube the chain with Squirt and take my fair-weather road bike out on the road again.
Attached Images

Last edited by mfcity; 04-19-18 at 11:13 AM. Reason: Misspelling
mfcity is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ColonelSanders
Bicycle Mechanics
50
08-19-17 01:09 PM
bonsai171
General Cycling Discussion
39
12-05-16 10:28 AM
DrRobert
Bicycle Mechanics
21
07-21-16 10:28 AM
fishymamba
Bicycle Mechanics
15
10-18-11 05:30 PM
damnable
Bicycle Mechanics
11
10-04-10 03:49 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.