Roadie making crunchy noises from front derailleur
#1
Member
Thread Starter
Join Date: Apr 2015
Location: Montreal
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Roadie making crunchy noises from front derailleur when in easiest gear
https://youtu.be/RhCPa9et_8E
I'm not sure what's going on here, any ideas, it's not rubbing on derailleur or anything, only makes the noise when under load and in the easiest gear, not when it's being spun by hand, when I use trim the chain rubs when it's in the biggest rear cog and smallest front sprocket but the crunch noise goes away
I'm not sure what's going on here, any ideas, it's not rubbing on derailleur or anything, only makes the noise when under load and in the easiest gear, not when it's being spun by hand, when I use trim the chain rubs when it's in the biggest rear cog and smallest front sprocket but the crunch noise goes away
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,865 Times
in
2,312 Posts
Perhaps the small ring is worn? What I do hear is really bad shifting technique, though unrelated to your question. Andy