Stem and shim height compatibility
04-15-18 | 01:10 PM
#1
Thread Starter
Junior Member
Joined: Oct 2017
Posts: 11
Likes: 0
Stem and shim height compatibility
I'm replacing the stem on a 1" steer tube, so I need a stem shim. Can I safely use a 38mm shim with a 40mm stack height stem? If not, is there a reason why 40mm stem shims aren't available where 40mm stems are (online and multiple LBSs)?
04-15-18 | 01:16 PM
#2
Senior Member
Joined: Aug 2005
Posts: 33,657
Likes: 1,119
From: Pittsburgh, PA
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Yes, the 38 mm shim will be perfectly fine with the 40 mm stem clamp height. The minimal height difference will still assure the stem has both clamp bolts tightening on the shim.
04-16-18 | 02:03 PM
#5
Senior Member
Joined: Jan 2003
Posts: 324
Likes: 2
From: Tichborne, Ontario, Canada
Bikes: Trek 5200, Giant Rainier, Devinci Destination,Motobecane CF, Bike Friday family tandem, Bike Friday NWT
