Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

What Makes A Wobble?

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

What Makes A Wobble?

Thread Tools
 
Search this Thread
 
Old 06-17-19 | 10:16 PM
  #1  
Thread Starter
Junior Member
 
Joined: Apr 2019
Posts: 108
Likes: 17
What Makes A Wobble?

Hello All,

The bike: A 90's "Balance" brand mountain bike with no suspension and a basic 3x7 setup. Ridden daily, I have added fenders and a rack.

On Friday, it rode as usual.

On Saturday, it started making a whoosh/rub noise intermittently, but it would only start after being ridden for a bit. The noise really sounds like the front fender rubbing, but I inspected both fenders and tires and saw no evidence. I removed and reset the front fender to be sure. The front tire was a bit low, so I pumped it up.

Sunday and today: The sound persists, and now there is an intermittent wobbling feeling. For about 15 feet at a time, it feels like SOMETHING is wobbling left to right, then it stops.

Neither wheel is significantly out of true, and there is no play in the axles when pushing side to side. The headset bearings have no play, but the bottom bracket cartridge has a very small amount of sideways movement. Neither QR skewer or lever was crooked or loose.

So, assuming that the noise and wobble are connected, anyone have any bright ideas?
OldBike876 is offline  
Reply
Old 06-17-19 | 10:29 PM
  #2  
Andrew R Stewart's Avatar
Senior Member
Titanium Club Membership
10 Anniversary
 
Joined: Feb 2012
Posts: 19,381
Likes: 5,527
From: Rochester, NY

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

First thought is to do the prudent thing and have a set of experienced eyes/hands have a go. The list of potentials is long but I would wonder about the rear axle/bearings. Assuming a rear QR skewer, a broken axle is somewhat "splinted" in place with the skewer so without significant force involved in the test the wheel would remain fairly stationary. Mere speculation on my part though. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Reply
Old 06-18-19 | 05:08 AM
  #3  
dsbrantjr's Avatar
Senior Member
15 Anniversary
 
Joined: Sep 2010
Posts: 8,327
Likes: 1,112
From: Roswell, GA

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

I would pull both wheels off and check for a broken axle. If OK, I would remove the fenders, one at a time and see whether the noise goes away. This might help localize the noise.
dsbrantjr is offline  
Reply
Old 06-19-19 | 11:20 AM
  #4  
Wilfred Laurier's Avatar
Seņor Member
10 Anniversary
 
Joined: Feb 2013
Posts: 5,070
Likes: 306
A wobble you can 'feel' is usually the result of a bulge in a tire caused by damaged casing.

Remedy: replace tire
Wilfred Laurier is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JetBadger
Road Cycling
12
04-28-15 08:21 AM
curdog
Fifty Plus (50+)
4
12-04-11 01:14 PM
boogman
Bicycle Mechanics
9
09-23-11 09:35 AM
-Incubus-
Bicycle Mechanics
7
03-24-11 03:32 PM
skyzo
Bicycle Mechanics
17
11-07-10 03:36 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.