Brake system
#1
Member
Thread Starter
Brake system
I have a Trek Marlin 5 from 2019 that I just got used, and I am a newbie to learning about how bikes work.
I can see with my own 2 eyes that it has disc brakes...but am I correct that they are not hydraulic and therefore require little to maintenance besides making sure that the wires are tight?
The bike specs are at:
trekbikes.com/us/en_US/bikes/mountain-bikes/cross-country-mountain-bikes/marlin/marlin-5/p/23134/
I can see with my own 2 eyes that it has disc brakes...but am I correct that they are not hydraulic and therefore require little to maintenance besides making sure that the wires are tight?
The bike specs are at:
trekbikes.com/us/en_US/bikes/mountain-bikes/cross-country-mountain-bikes/marlin/marlin-5/p/23134/
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,987
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,809 Times
in
3,317 Posts
If you don't see any bare wire cable when it gets to the disc caliper body, then it's likely hydraulic. TeckTRO ? Shimano?
#4
Member
Thread Starter
#5
Member
Thread Starter
Likes For dabac:
#7
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,389
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,971 Times
in
1,918 Posts
never loan your cycle out = better luck
__________________
-Oh Hey!
-Oh Hey!
#8
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,987
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,809 Times
in
3,317 Posts
Or establish a relationship with a LBS that sells Trek or another nearby shop that works on anything. For things that don't require replacement parts many LBS's are inexpensive. At least that's been my experience. A lot of the stuff I've had them do for me, I'd charge more for it I did it. Guess it's a good thing I don't own a LBS.
If you are going to DIY, then find the manufacturers documentation for servicing them.
https://www.tektro.com/download.php
https://si.shimano.com/#/
And Park Tool has some decent videos and written info to look at.
https://www.parktool.com/blog/repair-help
If you are going to DIY, then find the manufacturers documentation for servicing them.
https://www.tektro.com/download.php
https://si.shimano.com/#/
And Park Tool has some decent videos and written info to look at.
https://www.parktool.com/blog/repair-help
#9
Member
Thread Starter
[QUOTE=Iride01;21959542]Or establish a relationship with a LBS that sells Trek or another nearby shop that works on anything. For things that don't require replacement parts many LBS's are inexpensive. At least that's been my experience. A lot of the stuff I've had them do for me, I'd charge more for it I did it. Guess it's a good thing I don't own a LBS.
Thanks! I am looking to learn how to do most bike maintenance myself, not to save money, but just to learn a new skill. Should be interesting.
Thanks! I am looking to learn how to do most bike maintenance myself, not to save money, but just to learn a new skill. Should be interesting.
#10
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,084
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4205 Post(s)
Liked 3,863 Times
in
2,311 Posts
Initially one tends to spend more cost, in $, time and reliability, as one begins to learn how to do bike maintenance. Tools cost $. Judgement is not yet well honed. Parts are sometimes damaged or negatively affected with poor techniques. Having to revisit the service job one's learning is common for beginners.
But in the long run one gets faster, better and learns their limits so the efforts have better results. Andy
But in the long run one gets faster, better and learns their limits so the efforts have better results. Andy
__________________
AndrewRStewart
AndrewRStewart
#11
Member
Thread Starter
Initially one tends to spend more cost, in $, time and reliability, as one begins to learn how to do bike maintenance. Tools cost $. Judgement is not yet well honed. Parts are sometimes damaged or negatively affected with poor techniques. Having to revisit the service job one's learning is common for beginners.
But in the long run one gets faster, better and learns their limits so the efforts have better results. Andy
But in the long run one gets faster, better and learns their limits so the efforts have better results. Andy
That is my attitude for sure! I already stripped the threads on a cone I think and will probably be buying a new one. But it's all part of the learning process. It's not about the money for me.