Shortening a steel steerer-tube: Why not use a pipe-cutter?
#1
QR-disc must die!!!
Thread Starter
Join Date: Sep 2018
Location: Shenandoah Valley, Northern Virginia.
Posts: 703
Bikes: '99 Trek 520, '20 Kona Sutra (FOR SALE 48cm), '21 Simon-Bikes mini-velo and a chromoly-framed folding bicycle with drop-bars and V-brakes, that rolls even while folded.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 397 Post(s)
Likes: 0
Liked 199 Times
in
147 Posts
Shortening a steel steerer-tube: Why not use a pipe-cutter?
I've used a pipe-cutter tool for shortening a steel seatpost. It makes a perfect cut, with minimal effort, and relatively quickly. Why then does every instruction I've read call for using a hacksaw-and-guide when shortening a fork steerer tube? I had my LBS shorten the steerer tube on a new steel fork and they too used the saw-and-guide. It seems to be unanimous. Why is that, when an inexpensive pipe-cutter tool is so much quicker, easier and gives a consistently perfect result?
#2
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,983
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2643 Post(s)
Liked 1,994 Times
in
1,249 Posts
While we wait for someone who knows the answer, I'll speculate a bit.
1. A steel steerer is probably harder than copper pipe, so if you're cutting a bunch of steerers (like a shop or production facility) you're running up tool costs.
2. Ever start to cut a pipe and don't have it lined up quite right? How would you like to do that spiral cut thing with a fork?
1. A steel steerer is probably harder than copper pipe, so if you're cutting a bunch of steerers (like a shop or production facility) you're running up tool costs.
2. Ever start to cut a pipe and don't have it lined up quite right? How would you like to do that spiral cut thing with a fork?
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,288
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 6354 Post(s)
Liked 4,957 Times
in
3,413 Posts
I'd go for #1 of what @pdlamb said. Along with the fact that many people probably don't have a pipe cutter and if they do, then it won't cut something the size of a steerer tube. However I have one that will cut over 4" diameter pipe along with 3 or 4 pipe cutters in various smaller sizes.
Likes For Iride01:
#4
Senior Member
There's also the mushrooming effect, which anybody who's cut a handlebar then tried to slide the grips on will be familiar with: a pipe cutter tends to push the metal away on both sides of the cut, making the diameter a smidge larger. I solve this with a file after cutting a bar, I don't know how much work that would be on a steerer.
#5
Senior Member
Join Date: Jul 2014
Location: Central Indiana
Posts: 2,159
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 915 Post(s)
Liked 516 Times
in
345 Posts
They are technically called roll cutters, or specifically "displacement cutters" and for a reason. When they "cut", the wheel just "smooshes" the material out of the way until it breaks in two leaving a flaired mushroom end on the outside and a huge burr on the inside. Much filing/reaming inside and out required for a close tolerance stem insertion. Really is meant for actual gas pipe, not chromo or high end light weight high strength steel.
I see I was typing way too slow, Joe.
I see I was typing way too slow, Joe.
Likes For FBOATSB:
#6
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,740
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 863 Post(s)
Liked 1,106 Times
in
771 Posts
There's also the mushrooming effect, which anybody who's cut a handlebar then tried to slide the grips on will be familiar with: a pipe cutter tends to push the metal away on both sides of the cut, making the diameter a smidge larger. I solve this with a file after cutting a bar, I don't know how much work that would be on a steerer.
#7
Advanced Slacker
Join Date: Feb 2017
Posts: 6,226
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2769 Post(s)
Liked 2,549 Times
in
1,438 Posts
If you have a pipe cutter big enough, there is no reason you can’t use it, as long as you file the edges (as someone else mentioned, you get some mushrooming). Its not a big deal to clean up the edges. I doubt I have ever spent more than a minute or two doing it.
Before I got a saw guide, I liked using a pipe cutter because it gave me a straighter cut.
Before I got a saw guide, I liked using a pipe cutter because it gave me a straighter cut.
Last edited by Kapusta; 02-07-23 at 06:59 PM.
Likes For Kapusta:
#8
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,065
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5978 Post(s)
Liked 2,894 Times
in
1,609 Posts
My first rule of good mechanical work is to use the simplest tool for the job.
For cutting bars, stems and seatposts, that would be a hacksaw.
A simple guide can be made with one or two hose clamps.
The case against pipe cutters is simple,it's the wrong tool for the job.
1 in the size range needed it's costlier than a saw.
2 pipe cutters are for soft materials that flow easily. Heat treated steels and aluminum alloys aren't.
3 pipe cutters roll a large burr to the inside, and raise a smaller one on the OD, so there's more clean up work needed.
4 with a modicum of skill, a saw raises a small burr which files off easily.
FWIW pro bike mechanics used hacksaws for a century, but as culture evolved, folks started doing more DIY, and eventually word got out that it was easier to buy a pipe cutter than to learn to cut straight with a saw.
For cutting bars, stems and seatposts, that would be a hacksaw.
A simple guide can be made with one or two hose clamps.
The case against pipe cutters is simple,it's the wrong tool for the job.
1 in the size range needed it's costlier than a saw.
2 pipe cutters are for soft materials that flow easily. Heat treated steels and aluminum alloys aren't.
3 pipe cutters roll a large burr to the inside, and raise a smaller one on the OD, so there's more clean up work needed.
4 with a modicum of skill, a saw raises a small burr which files off easily.
FWIW pro bike mechanics used hacksaws for a century, but as culture evolved, folks started doing more DIY, and eventually word got out that it was easier to buy a pipe cutter than to learn to cut straight with a saw.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Likes For FBinNY:
#9
Advanced Slacker
Join Date: Feb 2017
Posts: 6,226
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2769 Post(s)
Liked 2,549 Times
in
1,438 Posts
I assume the reason someone would consider using a pipe cutter is because they already had one. If you already have one, it is cheaper than two hose clamps.
The important thing is to pick the method that works best for you, and then be a d!ck about it.
The important thing is to pick the method that works best for you, and then be a d!ck about it.
Likes For Kapusta:
#10
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,984
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2395 Post(s)
Liked 2,952 Times
in
1,611 Posts
The bigger question is will you have enough threads left when you are done cutting, how ever you do it?
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
#12
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,844
Bikes: Several, mostly not name brands.
Mentioned: 154 Post(s)
Tagged: 0 Thread(s)
Quoted: 3617 Post(s)
Liked 3,454 Times
in
1,960 Posts
Likes For JohnDThompson:
#13
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,984
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 2395 Post(s)
Liked 2,952 Times
in
1,611 Posts
__________________
Life is too short not to ride the best bike you have, as much as you can.
Life is too short not to ride the best bike you have, as much as you can.
Likes For squirtdad:
#14
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,557
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2755 Post(s)
Liked 3,427 Times
in
2,075 Posts
plumbers have been cutting galvanized and black gas steel pipe with pipe cutters forever. mechanics steel brake, fuel, and cooler lines as well.
Likes For dedhed:
#15
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,464
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3133 Post(s)
Liked 2,116 Times
in
1,379 Posts
#17
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,167
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4239 Post(s)
Liked 3,975 Times
in
2,363 Posts
What?? There are plenty of bike made with threadless steel steerers. I just finished making a bike with one. Left it long to double check the fit set up before I consider cutting it a second time to a final length. I used a hack saw and a bit of masking tape as a visual guide to keep it close to square before I used both a belt sander and a rat tail file to finish it off with. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart:
#18
I’m a little Surly
Join Date: Jan 2010
Location: Near the district
Posts: 2,429
Bikes: Two Cross Checks, Karate Monkey, Disc Trucker, and a VO Randonneur
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 699 Post(s)
Liked 1,304 Times
in
651 Posts
I have a saw and a park guide and a pipe cutter big enough for steer tubes, I generally use the pipe cutter and a file to cut steerers.
#19
cowboy, steel horse, etc
Join Date: Sep 2008
Location: The hot spot.
Posts: 45,202
Bikes: everywhere
Mentioned: 74 Post(s)
Tagged: 1 Thread(s)
Quoted: 12998 Post(s)
Liked 7,916 Times
in
4,209 Posts
I've cut a couple of steel steerers with a pipecutter.
Lived to tell about it
Lived to tell about it
Likes For LesterOfPuppets:
#20
Senior Member
I love how quickly this thread sailed off a cliff. I'm usually in the Folding Bikes section and this one is new to me..so far it's pretty funny!
#21
Senior Member
Join Date: Apr 2011
Posts: 7,384
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4605 Post(s)
Liked 1,764 Times
in
1,155 Posts
It takes less than a minute to cut a steel steerer with a $1 hack saw blade. What's to debate?
The only cutting guide you need is the stem you already own and aluminum spacer.
The only cutting guide you need is the stem you already own and aluminum spacer.
Last edited by Kontact; 02-08-23 at 12:11 AM.
#22
Rhapsodic Laviathan
Likes For Jax Rhapsody:
#23
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,288
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 6354 Post(s)
Liked 4,957 Times
in
3,413 Posts
I have cut some better steel tube that was thinner than plumbing iron pipe with a pipe cutter, they didn't mushroom out externally. However they did roll in a pronounced inverted flare toward the inside of the tube that would have been a real pain to remove evenly if I had to put something inside them like a expander plug.
Good catch for the member that ask about threads. I doubt one could easily make a pipe cutter work on a threaded steerer tube.
#24
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,464
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3133 Post(s)
Liked 2,116 Times
in
1,379 Posts
Factory forks come uncut but steel ones are now vastly outnumbered.
So I figure while one guy might do it a lot, most aren't much.
And finally the Surly LHT and Cross Check were long well known for having very long top tubes (10mm longer than the seat tube) that resulted in a stack of spacers topped with a riser stem.
__________________
Genesis 49:16-17
Genesis 49:16-17
#25
Senior Member
Join Date: Jul 2005
Posts: 7,493
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 164 Times
in
90 Posts
My strong impression is that most people who stick together steel frames for a living or hobby are doing threaded headsets for aesthetic reasons, or using carbon or MTB forks.
Factory forks come uncut but steel ones are now vastly outnumbered.
So I figure while one guy might do it a lot, most aren't much.
And finally the Surly LHT and Cross Check were long well known for having very long top tubes (10mm longer than the seat tube) that resulted in a stack of spacers topped with a riser stem.
Factory forks come uncut but steel ones are now vastly outnumbered.
So I figure while one guy might do it a lot, most aren't much.
And finally the Surly LHT and Cross Check were long well known for having very long top tubes (10mm longer than the seat tube) that resulted in a stack of spacers topped with a riser stem.