Shifter ideas to overcome partial thumb amputation
#1
Newbie
Thread Starter
Join Date: May 2021
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Shifter ideas to overcome partial thumb amputation
I have a partial amputation of the left thumb. My road bike has brifters and I am confident with my control of the bike. My touring bike has bar ends and I am okay on paved roads but unpaved roads and trails have made me a bit nervous at times. The issue is when I have to make an adjustment with the rear derailleur and the right hand is relocated from the top of the bar. I've been startled several times by surprise bumps, dips, soft spots, etc... The bike is equpped with TRP HY/RD brakes and levers, along with 3x10 Deore derailleurs. Brifters would be okay but I don't think Shimano offered any 3x10 brifters in the MTB line and I've read that the road brifter will not play well with the MTB front derailleur. A thumb-shifted front derailleur mounted next to a brifter on the right side seems like a decent solution but I have not been able to find anthing like that. I don't know if Shimano even offered a 3x MTB thumb-shifter. I've looked at the Gevenalle but the front shifter looks like it may a challenge for me to operate. Any thoughts or ideas would be greatly appreciate.
#2
Senior Member
Join Date: Dec 2008
Location: Pioneer Valley
Posts: 1,045
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 344 Post(s)
Liked 777 Times
in
402 Posts
Are you looking for something for drop bars or flat bars? If drop bar, maybe both a brifter and bar end shifter on the right side, both operated with the right hand with the bar end controlling the front derailleur?
#3
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,400
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2500 Post(s)
Liked 2,978 Times
in
1,689 Posts
I'd use flat bars and Grip Shift. Some people hate them, but a number of us prefer them to the alternatives.
#5
Senior Member
Join Date: Sep 2005
Location: Michigan
Posts: 3,708
Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 337 Times
in
252 Posts
What about a SunRace 3sp thumb shifter? They work very well. As to 10sp, I shift over them with an 11sp Sram, just not using the extra stop.
#6
Newbie
Thread Starter
Join Date: May 2021
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Someone asked earlier if I wanted dop bars. Yes, I do. I hadn't run across the SunRace before. Thank you, I'll take a look at them.
#7
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,378
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6225 Post(s)
Liked 4,228 Times
in
2,372 Posts
I have a partial amputation of the left thumb. My road bike has brifters and I am confident with my control of the bike. My touring bike has bar ends and I am okay on paved roads but unpaved roads and trails have made me a bit nervous at times. The issue is when I have to make an adjustment with the rear derailleur and the right hand is relocated from the top of the bar. I've been startled several times by surprise bumps, dips, soft spots, etc... The bike is equpped with TRP HY/RD brakes and levers, along with 3x10 Deore derailleurs. Brifters would be okay but I don't think Shimano offered any 3x10 brifters in the MTB line and I've read that the road brifter will not play well with the MTB front derailleur. A thumb-shifted front derailleur mounted next to a brifter on the right side seems like a decent solution but I have not been able to find anthing like that. I don't know if Shimano even offered a 3x MTB thumb-shifter. I've looked at the Gevenalle but the front shifter looks like it may a challenge for me to operate. Any thoughts or ideas would be greatly appreciate.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Likes For cyccommute:
#8
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,817
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1948 Post(s)
Liked 2,178 Times
in
1,327 Posts
I have left thumb issues (pain) when shifting on a flat bar mtb with triggers. I went with an old Suntour XCD 6000. It is so enormous I can shift with my palm. It is friction and you'll have to modify the clamp for road bars, but it has eliminated using my thumb for shifting. FYI, Grip Shift didn't work.
https://velobase.com/ViewComponent.a...df184&Enum=104
John
https://velobase.com/ViewComponent.a...df184&Enum=104
John
#9
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4340 Post(s)
Liked 2,985 Times
in
1,621 Posts
@Jwhite_00
Is there a reason you aren't looking at electronic shifting? Lots of options there including extra shift buttons in different locations on the bars.
Check out this blogpost from a friend with a similar issue:
https://ccorlew.blogspot.com/2017/08...ranks-and.html
Is there a reason you aren't looking at electronic shifting? Lots of options there including extra shift buttons in different locations on the bars.
Check out this blogpost from a friend with a similar issue:
https://ccorlew.blogspot.com/2017/08...ranks-and.html
Likes For DiabloScott:
#10
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,812
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1096 Post(s)
Liked 1,036 Times
in
729 Posts
Gonna echo DiabloScott, the sram rival axs is great for this kind of thing. Get the xplr version which uses the standard shifters but a wider range cassette and in a 2x12 system will match your 3x10 system. What's nice with them is you can pair in 2 sets of wireless blips, I do dislike that they're 100.00 a set and the batteries aren't replaceable though I'm hopeful a workaround develops for that, but it lets you have two extra sets of shifters anywhere on the bar you want. My 8yo can effortlessly shift his bike with an easy press of a finger without removing his hands from the brake levers which is just a sweet setup. The rival shifters come with disc brakes which in my experience work better than the hy/rd, actually hoping to change my single speed's hy/rd to hylex brakes since the calipers have not survived the abuse of cyclocross very well and have seized up twice this year while training and racing.
If you don't want to change over you can look at Microshift levers. They offer a 3x10 set of brifters, make sure you get the ones that say they're tiagra 4600 series compatible, those will be compatible with your mtb rear der not certain how well the front der will mesh.
If you don't want to change over you can look at Microshift levers. They offer a 3x10 set of brifters, make sure you get the ones that say they're tiagra 4600 series compatible, those will be compatible with your mtb rear der not certain how well the front der will mesh.
Likes For choddo:
#13
Newbie
Thread Starter
Join Date: May 2021
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
and I just stumbled across the Paul Components Thumbies that would work with the Microshift shifters that I already have.
Thanks to all.
#14
ignominious poltroon
Join Date: Jan 2022
Posts: 4,078
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2252 Post(s)
Liked 3,464 Times
in
1,817 Posts
I was going to suggest e-shifting. So I will second that suggestion. If ever there was a perfect excuse for an upgrade.
Likes For Polaris OBark:
#15
Senior Member
Join Date: Aug 2009
Posts: 1,831
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 509 Post(s)
Liked 654 Times
in
386 Posts
Maybe, depends on the specific situation. My preference would be to keep the hand with the functional thumb on the bar, and figure out how to and what is required to shift with the other, but everyone knows their capabilities and preferences.
#17
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,903
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3258 Post(s)
Liked 2,099 Times
in
1,189 Posts
@Jwhite_00
Is there a reason you aren't looking at electronic shifting? Lots of options there including extra shift buttons in different locations on the bars.
Check out this blogpost from a friend with a similar issue:
https://ccorlew.blogspot.com/2017/08...ranks-and.html
Is there a reason you aren't looking at electronic shifting? Lots of options there including extra shift buttons in different locations on the bars.
Check out this blogpost from a friend with a similar issue:
https://ccorlew.blogspot.com/2017/08...ranks-and.html
#18
Senior Member
I picked up used, a Shimano road 11 front derailleur, the spring is softer, and, the lever on the derailleur is 1.5-2 times as long a leverage ratio but then needing a longer wire pull. Why the bike shop said, "Only works for shimano road 11." But here is what I want to do: Mount it for my double crank, driven by a grip shift, shifting from 1-3, twice the wire pull. Only hiccup in trying this is, the linkage on that derailleur (double-shear, more durable), interferes with my front derailleur mounting adaptor. They make newer adaptors that may work. My current (high force) derailleur, the linkage is not double-shear, but a more compact cantilever arrangement, fits the current adaptor.
#19
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,138
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1417 Post(s)
Liked 1,925 Times
in
1,106 Posts
I like the elec shifting option - know of one guy that recently purchased a bike with elec shifting due to significant issues with use of his hands and fingers - he has been very satisfied
also feel grip shift option has merit - was not a grip shift fan back-in-the-day but acquired a few old MTBs with grip shift and I was pleasantly surprised when riding them and have no immediate plans to change them
the one issue I had / have with grip shift was remembering which way to twist the grip … for me it was sorta / kinda counter intuitive
also feel grip shift option has merit - was not a grip shift fan back-in-the-day but acquired a few old MTBs with grip shift and I was pleasantly surprised when riding them and have no immediate plans to change them
the one issue I had / have with grip shift was remembering which way to twist the grip … for me it was sorta / kinda counter intuitive
#20
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,903
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3258 Post(s)
Liked 2,099 Times
in
1,189 Posts
I installed electronic on my my bikes due to issues using my damaged thumbs trying to push levers on trigger shifters. My thumbs were too weak to get into bigger cogs and rings (when I ran triples). Di2 and AXS are easy button pushes
#22
Senior Member
#23
Senior Member
Funny you mention; Dahon folders used to come with their "compact" rear derailleur, mounted forward of the axle, worked poorly, especially onto the large cog with terrible ramps on the cog, nothing like hyperspaceglide. But ALSO, it was setup like "Rapid-Rise", the cable pulled to upshift, so the grip shift worked backwards from 99.999% of the bikes on the road. Fortunately, when I changed the derailleur to a conventional style, mounted aft and pulls to downshift, I was able to use the same gripshift, they are the same, just labeled different. So shifter now works like it should, but says 7 when on 1, and vice-versa.
#24
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,119
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,444 Times
in
821 Posts
Ritchey Beacon Handlebar with the brifters angled inward. I have 2 bikes set up like this. It has taken my badly arthritic thumbs almost out of the equation. They are short reach and shallow drop with 36 degree flare. I bought the first one on sale, liked it so much I acquired another. At first, I thought the flare was going to be too much, but, for me, it is not. I actually made the change to help alleviate spine and shoulder issues, the relief on the thumbs was a very pleasant surprise.