Diamondback Sorrento Stem Size?
05-20-25 | 04:25 PM
#1
Thread Starter
Senior Member
Joined: Jun 2013
Posts: 1,356
Likes: 202
Diamondback Sorrento Stem Size?
I'm helping a guy across town build up a vintage Diamondback Sorrento. He needs a quill stem amongst other things, Does it take a 22.2 or a 25.4 quill stem post size? Thank you.
05-20-25 | 06:51 PM
#2
Senior Member
Joined: Feb 2012
Posts: 19,373
Likes: 5,516
From: Rochester, NY
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
That might depend on the year the bike was designed and made in. My poor searching skills suggest this model was first offered in 1994 up to at least 2016. I'll bet that at least a few different stem/steerer specs were used over the years. Andy
Ask the owner to try to slide a quarter, $.25, down into the steerer top. The quarter is just under 1" in diameter but too larger to fit inside a 22.2 ID.
Ask the owner to try to slide a quarter, $.25, down into the steerer top. The quarter is just under 1" in diameter but too larger to fit inside a 22.2 ID.
__________________
AndrewRStewart
AndrewRStewart
Last edited by Andrew R Stewart; 05-20-25 at 06:54 PM.
