Mongoose bicycle, replace handlebar stem
06-06-25 | 03:32 PM
#1
Thread Starter
Truck mechanic
Joined: Jun 2025
Posts: 2
Likes: 0
From: Owosso Michigan
Bikes: Mongoose
Mongoose bicycle, replace handlebar stem
It looks like it has a non-standard bicycle stem without a long bolt and a wedge. It only has a short with a one and a half inch Allen bolt that goes down to a star washer that looks like if you tighten it it will expand the washer. Unfortunately I can't post a picture because I'm a newbie
06-06-25 | 03:52 PM
#2
Insane Bicycle Mechanic
Joined: Mar 2008
Posts: 10,156
Likes: 1,122
From: other Vancouver
It sounds like you are describing an “Ahead” type stem. Are there sideways clamp bolts just above the headset?
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
06-06-25 | 04:49 PM
#4
Senior Member
Joined: Apr 2011
Posts: 12,650
Likes: 4,793
Correct, but it also controls your headset bearing adjustment. So find out how you do that as well.
Last edited by Kontact; 06-06-25 at 07:02 PM.
06-06-25 | 06:26 PM
#5
Clark W. Griswold
Joined: Mar 2014
Posts: 18,265
Likes: 6,631
From: ,location, location
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
I wouldn't recommend getting anything from Amazon but your local shop can help you so you don't run into issues. They can make sure you get the correct sizes and get it adjusted properly.
06-06-25 | 07:07 PM
#6
Senior Member
Joined: Jul 2015
Posts: 7,379
Likes: 3,222
From: NW Oregon
Bikes: 1982 Trek 930R Custom, '91 Diamondback Ascent w/ XT, XTR updates, Fuji Team Pro CF road flyer, Specialized Sirrus Gravel Convert, '09 Comencal Meta 5.5 XC, '02 Marin MBX500, '84 Gitane Criterium bike
you'll want to watch this vid... and OVER-tightening is easy to do, but has BAD results..
over-tightening the clamp screws can and may cause the stem to CRACK, so be careful, and if you have a small torque wrench, now is the time to use it.
AND.. make darn sure any SEALS get back in the correct orientation and positions, or you'll be hating life until the new parts arrive.
been there, done it.
over-tightening the clamp screws can and may cause the stem to CRACK, so be careful, and if you have a small torque wrench, now is the time to use it.
AND.. make darn sure any SEALS get back in the correct orientation and positions, or you'll be hating life until the new parts arrive.
been there, done it.
Last edited by maddog34; 06-06-25 at 07:10 PM.
