not what it used to be......
#1
St. Louis Rams!
Thread Starter
Join Date: Oct 2005
Posts: 61
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
not what it used to be......
I'm overhauling a friend's ancient Schwinn cruiser and after buying the CORRECT 26" tires, they are wayyyy too small to fit the rim. And it definately said 26" on the old tires. I got them from Wal-Mart. (no use spending too much money on a bike you could hardly sell now) So anyway, have the tire dimentions changed? And what can I do?
#2
Senior Member
Join Date: Jun 2003
Posts: 18,138
Bikes: 2 many
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1266 Post(s)
Liked 323 Times
in
169 Posts
The modern 26" tires are the wrong thing (obviously) You may need to go to a bike shop to get the old "Schwinn" 26" tires, they are still around.
There is one I have used that says "for Schwinn S-6" on the tires. I think there may be others as well. Read the sidewall of the old tires very carefully for something like that.
There is one I have used that says "for Schwinn S-6" on the tires. I think there may be others as well. Read the sidewall of the old tires very carefully for something like that.
#3
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
There are several different "26-inch" bike tires available these days. To sort out the differences, a system of nomenclature was developed by the European Tire and Rim Technical Organization (ETRTRO) that is now known as the ISO (International Standards Organization) sizes. They are specified using the rim diameter in mm and the tire width in mm. So watch the ISO numbers carefully to tell what you need.
The most common 26" tires are Mountain Bike tires and they have an ISO rim diameter of 559mm so the tires will be marked 559 X Y mm where Y is the tire width. These are most likely what you got at Wal-Mart.
There is a 650C rim typically used on small frame road bikes and often referred to as a 26" wheel. It is ISO 571 mm.
Schwinn cruisers used a 26" wheel that has an ISO size of 571 mm and should be marked "S-7" on the tire sidewall. Schwinn lightweights used a 26" tire for an ISO 597 mm rim marked "S-6".
Along with these there are a few other "26-inch" rims and tires out there so be careful to match EXACTLY what you took off the bike. Good luck.
The most common 26" tires are Mountain Bike tires and they have an ISO rim diameter of 559mm so the tires will be marked 559 X Y mm where Y is the tire width. These are most likely what you got at Wal-Mart.
There is a 650C rim typically used on small frame road bikes and often referred to as a 26" wheel. It is ISO 571 mm.
Schwinn cruisers used a 26" wheel that has an ISO size of 571 mm and should be marked "S-7" on the tire sidewall. Schwinn lightweights used a 26" tire for an ISO 597 mm rim marked "S-6".
Along with these there are a few other "26-inch" rims and tires out there so be careful to match EXACTLY what you took off the bike. Good luck.