Cannondale Tandem BB Clunk ??
#1
Shut Up and Ride
Thread Starter
Join Date: Apr 2005
Location: Colorado Springs, CO
Posts: 578
Bikes: Cannondale t-700 [commuter], Cannondale MT-800 [Tandem so the Lil Misses can keep up], GT I drive Team [My tricked out Racer MTB]
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cannondale Tandem BB Clunk ??
We have a Cannondale MT800 26" tandem that seems to have a problem in the cranks or BB somewhere. When the Captian's RT side crank arm is at 1:00, a clunking noise is heard as pressure is applied to the arm. The more pressure on the crank arm, the louder the clunk noise is. It will do it on every revolution in the same position.
I took the whole eccentric BB apart, greased and reassembled. [It is the single wedge design] Noise was slightly less for maybe 20 miles, but is back in it's full glory now.
Has anybody, by chance, seen this before ?
What may be causing the issue?
BB is octalink if that makes a difference.
Thanks !!
Don
[Posting in tandem board as well]
I took the whole eccentric BB apart, greased and reassembled. [It is the single wedge design] Noise was slightly less for maybe 20 miles, but is back in it's full glory now.
Has anybody, by chance, seen this before ?
What may be causing the issue?
BB is octalink if that makes a difference.
Thanks !!
Don
[Posting in tandem board as well]