Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

whistlin' wheels or something...

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

whistlin' wheels or something...

Thread Tools
 
Search this Thread
 
Old 12-14-06 | 12:55 PM
  #1  
rando's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2006
Posts: 2,968
Likes: 0
From: Tempe, AZ
whistlin' wheels or something...

wheels "whistling".

no, not whistling a tune, but a whistling seems to be coming from the front wheel/tire/hub/somewhere.
it seems to get higher when I go faster, and kind of get interrupted when I hit small bumps. but it is still there. when I used my brakes I discovered it is exactly the noise (but quieter) that the brakes make on the rims if I just squeeze them a bit but do not brake hard. I looked at the brake pads and they do not seem to be rubbing on the rims as I am riding. any guesses? is it nothing? thanks.
__________________
"Think of bicycles as rideable art that can just about save the world". ~Grant Petersen

Cyclists fare best when they recognize that there are times when acting vehicularly is not the best practice, and are flexible enough to do what is necessary as the situation warrants.--Me
rando is offline  
Reply
Old 12-14-06 | 01:14 PM
  #2  
50 tooth Cannon's Avatar
Amferny
 
Joined: Nov 2006
Posts: 142
Likes: 0
From: San Francisco

Bikes: 88 Cannondale M500 SS, 86 C'dale R300, 96 C'dale R400, 1966 Hercules 3spd

dry bearings maybe? Sounds like brake contact actually. Do the quick release (open) on the front brakes and see if it still whistles. If it does, it's the wheel. prhaps axle cones are too tight even. That is if you DON"T have sealed bearings in yer wheels.
50 tooth Cannon is offline  
Reply
Old 12-14-06 | 03:31 PM
  #3  
matimeo's Avatar
Senior Member
 
Joined: Feb 2006
Posts: 808
Likes: 16
From: Beaverton, OR

Bikes: It's the motor, not the bike, right?

sometimes knobby mountain bike tires whistle the faster you go- don't know if that's what you're riding though
matimeo is offline  
Reply
Old 12-14-06 | 03:37 PM
  #4  
rando's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2006
Posts: 2,968
Likes: 0
From: Tempe, AZ
thanks-- it's an old Univega Competizione road bike from the early 80s. smooth tires. yeah, I know that sound-- no this is a whistling sound. or squealing. I just checked the back brakes and they are awfully close to the rims. it might be them that are sqealing having a bit of contact with the rim.
__________________
"Think of bicycles as rideable art that can just about save the world". ~Grant Petersen

Cyclists fare best when they recognize that there are times when acting vehicularly is not the best practice, and are flexible enough to do what is necessary as the situation warrants.--Me

Last edited by rando; 12-14-06 at 03:42 PM.
rando is offline  
Reply
Old 12-18-06 | 03:30 AM
  #5  
Senior Member (retired)
 
Joined: Oct 2004
Posts: 32
Likes: 0
From: Katikati New Zealand

Bikes: 1959 Helyett T de France Reynolds 531

whistling source

FWIW if all else fails the noise may well be caused by the airflow over the small drainage holes in the front fork legs. These can generate an edgetone in exactly the same way that a flute produces sound. My bike has a steel fork which whistles quite well, and I assume that your elderly bike has a steel fork also. To determine whether the fork is the cause stick bits of tape over the holes to blank them off. I did, and mine went dead quiet. Could be your answer too. Whether you leave them blanked off is your decision.

Cheers
tedward is offline  
Reply
Old 12-18-06 | 05:00 AM
  #6  
Retro Grouch's Avatar
Senior Member
Titanium Club Membership
20 Anniversary
 
Joined: Feb 2004
Posts: 30,225
Likes: 649
From: St Peters, Missouri

Bikes: Catrike 559 I own some others but they don't get ridden very much.

You probably have a dry wiper seal. That's one of those semi-common things. The wiper seal is on the cone and lightly contacts the hubshell. Put a tiny drop of silicon lube on it and that'll quiet the whistle.
Retro Grouch is offline  
Reply
Old 12-18-06 | 09:06 AM
  #7  
ollo_ollo's Avatar
Senior Member
20 Anniversary
 
Joined: Nov 2003
Posts: 5,366
Likes: 630
From: Soviet of Oregon or Pensacola FL

Bikes: Still have a few left!

My 70s Motobecane Grand Jubile has that whistle from the fork drain holes, took forever to determine where it was coming from but it isn't unpleasant & I can tolerate it now that I know its not a brake rubbing or some kind of bearing noise.
ollo_ollo is offline  
Reply
Old 12-18-06 | 04:15 PM
  #8  
rando's Avatar
Thread Starter
Senior Member
 
Joined: Mar 2006
Posts: 2,968
Likes: 0
From: Tempe, AZ
Thanks for the info! I will check all that out!
__________________
"Think of bicycles as rideable art that can just about save the world". ~Grant Petersen

Cyclists fare best when they recognize that there are times when acting vehicularly is not the best practice, and are flexible enough to do what is necessary as the situation warrants.--Me
rando is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.