Idea to plug my fork holes?
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Houston we have a problem
Posts: 2,914
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Idea to plug my fork holes?
I have a nashbar carbon fork that has disc brake tabs and caliper posts.
I am using a disc brake so i removed the caliper posts.
Now i'm left with silver threaded holes in the front of a black carbon fork.
Any ideas for something black to fill the holes with?
I thought about finding some black flat head screws at home depot but didn't know if maybe there was a better option or something that specifically addresses this.
Thanks!
I am using a disc brake so i removed the caliper posts.
Now i'm left with silver threaded holes in the front of a black carbon fork.
Any ideas for something black to fill the holes with?
I thought about finding some black flat head screws at home depot but didn't know if maybe there was a better option or something that specifically addresses this.
Thanks!
#2
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
If you got $15 to burn, these are nice:https://www.jensonusa.com/store/produ...ne+Guides.aspx It'll plug the holes and serve as a line guide.
Otherwise, a pair of black, button head socket screws would be my choice - looks like:https://www.fastener-express.com/inde...S&Category=220
Otherwise, a pair of black, button head socket screws would be my choice - looks like:https://www.fastener-express.com/inde...S&Category=220
#4
Senior Member
Join Date: Dec 2005
Location: Okanagan Valley, BC CANADA
Posts: 1,049
Bikes: Trek 7300FX, Lemond Sarthe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Stacey
Your hardware store should have some plastic snap caps that will push in there and plug the holes nicely. It's what I used.
#5
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Houston we have a problem
Posts: 2,914
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Originally Posted by Stacey
Your hardware store should have some plastic snap caps that will push in there and plug the holes nicely. It's what I used.
Any idea what section of Lowe's or Home Depot I would look in for that?
Thanks!
#6
Member
Join Date: May 2006
Posts: 36
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
look in the hardware section, where all the nuts and bolts are. They will probably be in the drawers with the pictures of odds and ends on them.
Might try putting just a smidgeon of grease around the head before snapping in for a little more moisture protection.
Might try putting just a smidgeon of grease around the head before snapping in for a little more moisture protection.
#7
Senior Member
Join Date: Apr 2007
Location: Chili, NY
Posts: 733
Bikes: 88 Fisher Gemini tandem, 92 Trek 970, 07 Nashbar Frame, 08 Gary Fisher Paragon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have the same fork and I've not yet pulled the posts. I still have the plastic covers as supplied on the posts. I have thought about filling them with clear RVT Silicone. I figured that once cured, I could pull it out as a plug if I ever wanted to put the posts back in. The RTV would prevent any corrosion of the threads.
Chris
Chris
#8
Recreational Commuter
Join Date: Apr 2006
Location: Central Ohio
Posts: 1,024
Bikes: One brand-less build-up, and a Connondale Synapse Carbon Ultegra Disc. A nicer bike than I need, but it was a good deal, so... ;-)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 5 Times
in
3 Posts
Originally Posted by ang1sgt
I have the same fork and I've not yet pulled the posts. I still have the plastic covers as supplied on the posts. I have thought about filling them with clear RVT Silicone. I figured that once cured, I could pull it out as a plug if I ever wanted to put the posts back in. The RTV would prevent any corrosion of the threads.
Chris
Chris
Kotts
#9
Non Tribuo Anus Rodentum and off to the next adventure (RIP)
Join Date: Dec 2002
Posts: 9,161
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Originally Posted by vulcan
look in the hardware section, where all the nuts and bolts are. They will probably be in the drawers with the pictures of odds and ends on them.
Might try putting just a smidgeon of grease around the head before snapping in for a little more moisture protection.
Might try putting just a smidgeon of grease around the head before snapping in for a little more moisture protection.
#10
Senior Member
Join Date: Apr 2007
Location: Chili, NY
Posts: 733
Bikes: 88 Fisher Gemini tandem, 92 Trek 970, 07 Nashbar Frame, 08 Gary Fisher Paragon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by Kotts
Uhhhh, I'd be careful with that. As RTV cures it releases acetic acid. (Ever notice that it smells like vinegar?) You may get some acid etching of the threads, particularly if it gets trapped in there.
Kotts
Kotts
#11
Senior Member
Most black socket head hardware will rust very quickly as it only has a thin coating of black oxide on it (assuming it's a grade 10 or above). Somewhere there might be black zinc plated (much better corrosion resistance than black oxide) grade 8 socket head hardware but I doubt you'll find it at a basic hardware store. If using bolts, I'd go with stainless steel and paint the heads black with some nail polish or model paint.
#12
Senior Member
Join Date: Jul 2006
Location: Oklahoma
Posts: 411
Bikes: Bianchi San Remo, Cannondale SR500
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Use metric button head cap screws (very low profile head) and paint them black before you install them.