Shifter
10-21-07 | 09:11 PM
#1
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 123
Likes: 0
Shifter
Hi hope you guys are doing great.... question ? I have a 7 speed freewheel 13 - 23 .. crank set is a double.. have a suntour V-GT luxe rear derailleur , suntour VGt front
if i can use these together what shifter should i use... ?
any and all help is so welcome...!!!
RC
again thanks a ton
if i can use these together what shifter should i use... ?
any and all help is so welcome...!!!
RC
again thanks a ton
10-21-07 | 09:24 PM
#2
Thread Starter
Senior Member
Joined: Sep 2007
Posts: 123
Likes: 0
hi sorry should have added that the frame seems to have used a down tube shifter before but there are no lugs on it ... or top tube.... i'd love to have either a down tube or stem shifter just what would be best to use with that setup...
thanks a ton sorry just getting into bike repair and build
RC
thanks a ton sorry just getting into bike repair and build
RC
10-22-07 | 05:00 AM
#3
Death fork? Naaaah!!
Joined: Nov 2005
Posts: 5,531
Likes: 948
From: The other Maine, north of RT 2
Bikes: Seriously downsizing.
Most likely the DRs will work.
You need band-mount DT shifters or stem shifters, whatever you prefer.
Top
You need band-mount DT shifters or stem shifters, whatever you prefer.
Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
You know it's going to be a good day when the stem and seatpost come right out.
(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
10-22-07 | 07:36 AM
#4
Senior Member
Joined: Aug 2005
Posts: 33,657
Likes: 1,119
From: Pittsburgh, PA
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Any clamp-on downtube shifter in friction mode will work fine.
