First project - wobbly wheels.. umm help
07-20-08 | 12:37 AM
#1
Thread Starter
Junior Member
Joined: Jul 2008
Posts: 10
Likes: 0
First project - wobbly wheels.. umm help
So i've started my first fixed speed conversion.. the aim is to spend as little as possible so i'd prefer to recycle what i have already.
While removing the sprockets i found a few mashed bearings which i replaced however a washer type part that sits above the bearings was also all mangled so i removed it.
When i re-fitted the wheel i noticed that the wheel at the hub isn't secure, wobbles a bit when turned (also happens on the front wheel). All bolts have been tightened. Are my hubs needing replacement? They're freewheel hubs.
cheers
While removing the sprockets i found a few mashed bearings which i replaced however a washer type part that sits above the bearings was also all mangled so i removed it.
When i re-fitted the wheel i noticed that the wheel at the hub isn't secure, wobbles a bit when turned (also happens on the front wheel). All bolts have been tightened. Are my hubs needing replacement? They're freewheel hubs.
cheers
07-20-08 | 04:44 AM
#2
cab horn
Joined: Jun 2004
Posts: 28,353
Likes: 31
From: Toronto
Bikes: 1987 Bianchi Campione
