to upgrade or replace?
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: LI NY
Posts: 12
Bikes: too ashamed to say :)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
this is my first post so please bear with me
i have a semi low range mtb its a huffy (im a tad shamful) however it has an all aluminum frame minus the fork and aluminum rims its also a 21 speed. i thinks its a pritty good bike. however i think i have a bad barring in the rear hub. so i was thinking about getting a new upgraded hub and gearset and installing it and then maybe start up upgrading other parts as i go i.e. brakes, shifters, derailers and the rest of the drivetrain. is it worth it? i am very mechanicly inclined and dont have any worries about doing the work. i just dont want o throw good money after bad. i figured if i can keep my costs low that i should try and go this route. but being a "green" rider i know i dont have any good answers
i was looking at the shimano parallax or rm-40 hubs and a shimano gearset either 14-28 or 14-34. i know right now i dont need a high tooth count on my second option but since they are so close in price i figured it my not hurt to have it. right now i mostly do road riding but would like to eventually move to some trails.
if i were to go the replacing route i think my budget would be no more than $400. but i would have to take some time and save this. i have read some of the posts and noticed the the trek, specialized and gary fisher bikes would be a good place to start. i have not gone to my lbs cause i know i will impulse buy and really want to wait till i have the cash in had. also i dont know a good bike shop on long island, anyone have any suggestions? i live isn western suffork and work in central nassau so anything in the range will work for me. thanks in advance for the help
rick
i have a semi low range mtb its a huffy (im a tad shamful) however it has an all aluminum frame minus the fork and aluminum rims its also a 21 speed. i thinks its a pritty good bike. however i think i have a bad barring in the rear hub. so i was thinking about getting a new upgraded hub and gearset and installing it and then maybe start up upgrading other parts as i go i.e. brakes, shifters, derailers and the rest of the drivetrain. is it worth it? i am very mechanicly inclined and dont have any worries about doing the work. i just dont want o throw good money after bad. i figured if i can keep my costs low that i should try and go this route. but being a "green" rider i know i dont have any good answers
i was looking at the shimano parallax or rm-40 hubs and a shimano gearset either 14-28 or 14-34. i know right now i dont need a high tooth count on my second option but since they are so close in price i figured it my not hurt to have it. right now i mostly do road riding but would like to eventually move to some trails.
if i were to go the replacing route i think my budget would be no more than $400. but i would have to take some time and save this. i have read some of the posts and noticed the the trek, specialized and gary fisher bikes would be a good place to start. i have not gone to my lbs cause i know i will impulse buy and really want to wait till i have the cash in had. also i dont know a good bike shop on long island, anyone have any suggestions? i live isn western suffork and work in central nassau so anything in the range will work for me. thanks in advance for the help
rick
#2
Senior Member
Join Date: Aug 2003
Location: Oztraylya
Posts: 2,677
Bikes: '03 Fuji Roubaix Pro; '03 KleinGi Attitude; '06 Soma Rush; '04 Surly Cross-Check; '06 Soma Rush; '07 Scott CR1 / Chorus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Save up the $400 and buy yourself a new bike from the bike shop. The Huffy frame really isn't worth upgrading.
Specialized Hardrock or Rockhopper or a Trek 4300/4500/4700 would be great starting points.
Specialized Hardrock or Rockhopper or a Trek 4300/4500/4700 would be great starting points.
__________________
#3
The Rabbi
Join Date: Apr 2004
Posts: 5,123
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Mechanically inclined or not, you need a lot of bike specific tools to work properly on a bike, which is something to consider. The Huffy is DEFINATELY not worth upgrading at all. If the rear wheel is bad a replacement will run about $40, get that and ride it until you have money for a nicer bike.
#4
Junior Member
Thread Starter
Join Date: May 2004
Location: LI NY
Posts: 12
Bikes: too ashamed to say :)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
thats what i figured. i guess its for the best. now should i look for a used bike or new? i have found in other items that i may get more for my money with used equipment. is this the same for bikes? if im looking for used what should i look for? any years to stay away from? should i only look for something a year or two old? is there anything i should stay away from?
#5
The Rabbi
Join Date: Apr 2004
Posts: 5,123
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I would avoid used... you get no warranty and don't know whats wrong with the bike, and no free service from a shop. For what you save I don't think its worth it.
#6
riding a Pinarello Prince
Join Date: Jul 2000
Location: Downtown Toronto,Canada
Posts: 2,409
Bikes: Pinarello, Prince and an FP5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
don't upgrade, buy yourself a new bike, you deserve it
__________________
"Racso", the well oiled machine;)
"Racso", the well oiled machine;)
#7
Senior Member
Join Date: Nov 2003
Location: SE Minnesota
Posts: 12,275
Bikes: are better than yours.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Originally Posted by MacGyver
thats what i figured. i guess its for the best. now should i look for a used bike or new? i have found in other items that i may get more for my money with used equipment. is this the same for bikes? if im looking for used what should i look for? any years to stay away from? should i only look for something a year or two old? is there anything i should stay away from?
#8
Senior Member
Join Date: Sep 2001
Location: Montreal
Posts: 6,521
Bikes: Peugeot Hybrid, Minelli Hybrid
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Buy tools and learn to fix your Huffy. First get the tools for removing the sprockets and the cone wrenches, so you can grease and adjust your wheel bearings. A set of hex wrenches and a spoke wrench will also be needed for general adjustments. Buy more specialized tools only when you need them. These tools will last a lifetime and will make the Huffy last till you can get the bike you want. If you know all about fixing bikes, buying a used one should be no problem as you will be able to recognize the good from the bad.
#9
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,326 Times
in
837 Posts
Originally Posted by AndrewP
Buy tools and learn to fix your Huffy. ... Buy more specialized tools only when you need them. These tools will last a lifetime and will make the Huffy last till you can get the bike you want. If you know all about fixing bikes, buying a used one should be no problem as you will be able to recognize the good from the bad.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#10
Junior Member
Thread Starter
Join Date: May 2004
Location: LI NY
Posts: 12
Bikes: too ashamed to say :)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by John E
If I were in your position, this would be my course of action.
#11
Junior Member
Thread Starter
Join Date: May 2004
Location: LI NY
Posts: 12
Bikes: too ashamed to say :)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
what size should i be looking for? im 5'8" 165lbs. i was thinking maybe a 19" im prietty sure thats what im riding now but i dont even know if that was the right size
#12
Long-winded, semi-helpful
Join Date: Feb 2004
Location: Philadelphia, PA
Posts: 44
Bikes: 2004 Bianchi Veloce, Schwinn 3-speed, coaster-brake road bike, Fuji MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I second the recommendation to start learning to fix your Huffy, then as you get better at working on stuff, you can consider buying a good used bike.. Of course, if you start to enjoy working on bikes, most of your money may start going into that habit..
Although, all our glib recommendations to learn to fix your bike are easier said than done.. It's certainly best if you can hook up with other people who know some stuff and are willing to share.. So maybe check out these folks:
<https://www.lifreespace.org/freewheel/>
They're a group that is working on setting up a publicly-accessible repair shop where you can use their tools and learn bike maintenance. I have no experience with these folks personally; but I'm involved in a similar project here in New Orleans and I know of many around the country, and they seem to be a good way to get started in wrenching without getting overwhelmed.
If you have a good experience with them, PM me and let me know.
Good luck.
Y.
Although, all our glib recommendations to learn to fix your bike are easier said than done.. It's certainly best if you can hook up with other people who know some stuff and are willing to share.. So maybe check out these folks:
<https://www.lifreespace.org/freewheel/>
They're a group that is working on setting up a publicly-accessible repair shop where you can use their tools and learn bike maintenance. I have no experience with these folks personally; but I'm involved in a similar project here in New Orleans and I know of many around the country, and they seem to be a good way to get started in wrenching without getting overwhelmed.
If you have a good experience with them, PM me and let me know.
Good luck.
Y.
#14
Senior Member
Originally Posted by MacGyver
what size should i be looking for? im 5'8" 165lbs. i was thinking maybe a 19" im prietty sure thats what im riding now but i dont even know if that was the right size
#15
Senior Member
Join Date: Nov 2003
Location: SE Minnesota
Posts: 12,275
Bikes: are better than yours.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Originally Posted by MacGyver
i think i may go in this direction. i have the tools i need to do the work. you think i could reuse the bearrings i have or i should get new ones? i guess ill just have to pull it apart and do it to find out. whats the normal (and first timers) timeframe to do this? i would rather not be down too long without my bike.
That said, at some point you'll need to replace all components that wear. That means bearings, brake pads, chain, freehub, cables and housings. Since it is a Huffy, sooner rather than later. Also, your wheels are likely tensioned poorly. Some of these items will be more critical than others depending upon their condition.
#16
Senior Member
Join Date: Dec 2003
Location: Minnesota
Posts: 100
Bikes: Cannondale M2000 and Trek 970
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would recommend getting a used bike. You should be able to get a decent bike for around $200. It won't be anything fancy but it will be a lot better then what you have and worth putting a little time and money into repairing when it needs it. When looking at a used bike check for things like loose bearings in the wheels, bottom bracket, headset, and even the pedals. Also spin the wheels and make sure it is not wobbling all over the place. Small problems likely can be fixed but if there is major problems it may require replacing parts and that gets expensive.
#17
l337 HaxX0r
Join Date: May 2004
Posts: 96
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I would recommend used as well. Bikes are pretty expensive new and you can pick up some good used buys. There are deals out there you just have to be more cautious and informed when buying used than you do when buying new.
#18
Junior Member
Thread Starter
Join Date: May 2004
Location: LI NY
Posts: 12
Bikes: too ashamed to say :)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
no one has mention cannondale. is it cause its too high end for me now or cause its overrated? just wondering
#19
The Rabbi
Join Date: Apr 2004
Posts: 5,123
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I can't say I really like Cannondales... they aren't really any better than any other bike IMHO, and have some drawbacks in that they use proprietary technology that isn't very easy to service/upgrade.