Bike Forums

Bike Forums (https://www.bikeforums.net/forum.php)
-   Bicycle Mechanics (https://www.bikeforums.net/bicycle-mechanics/)
-   -   knocking noise in BB (https://www.bikeforums.net/bicycle-mechanics/739210-knocking-noise-bb.html)

trek330 05-29-11 06:12 AM

knocking noise in BB
 
I have a knocking noise as I pedal my bike from the bottom bracket area.I tightened the sprocket rings.I tightened the cranks.I changed the pedals and chain and freewheel and nothing helps.When I took off the cranks I rotated the bb bracket and though I didn't hear any knocking there was a clicking feel. Is that normal?The knock is once per revolution while the right pedal is abought at 2 oclock.Is the next step replacing the bottom bracket?The bike is an 85 trek 760 with all Campy Century components.What type of BB would it have and what tools would I need to replace it?Thanks in advance!

marley mission 05-29-11 06:14 AM

time for an overhaul perhaps?

losi 05-29-11 06:31 AM

hi trek330,
(Take in count that my Emglish not sdo good)
I had the same a short time ago on a bike that the lager could open. SO I opened, cleaned, greased and closed it untill it not mooved left and right. It is not good idea to press the lage. Need minimum press until it is not mooving.
Afte do the same will be OK I think.
losi

Unreqistered 05-29-11 09:58 AM

The two instances I've had a knock, it's been a loose spindle cartridge. In both cases I just needed to tighten up the cups.

hillsbreakme 05-29-11 02:06 PM

Is it pronounced while climbing? I had this problem with my 98 Nishiki road bike, the bottom bracket was out of adjustment (cup and cone type). You will probably need a cup wrench to and maybe a lockring tool, I was able to do mine without the lockring tool. It is not a hard job but requires some patience when adjusting the cup.

http://www.parktool.com/blog/repair-...racket-service

trek330 05-29-11 10:26 PM


Originally Posted by hillsbreakme (Post 12710555)
Is it pronounced while climbing? I had this problem with my 98 Nishiki road bike, the bottom bracket was out of adjustment (cup and cone type). You will probably need a cup wrench to and maybe a lockring tool, I was able to do mine without the lockring tool. It is not a hard job but requires some patience when adjusting the cup.

http://www.parktool.com/blog/repair-...racket-service

It's about the same climbing as not.A steady thump that drives me crazy!Anyhow i took the plunge and ordered the tools from e-bay today according to the the"Park Blue Books"directions.Great book!I also found NOS bearing set for Campy Victory for $15.00 and went for that too.Here's hoping I don't destroy the frame while I'm trying to rebuild the BB!I'll keep you posted!


All times are GMT -6. The time now is 02:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.