1337

Most guides on the internet are about forks which work using air pressure however i have a coil suspension fork - Rockshox Tora (some old model) and i don't have it's manual. You can see the fork in attachments.

In all fork maintainance videos i see that there is a foam ring under the wiper seals however there isn't one in mine. Then how i should lubricate the stanchions? Just put some lube underneath the wiper seal where the foam rings were supposed to be? And what kind of lube i should use?
Is there anything else i should do for my fork maintenance other than that?

Also why is that my lockout isn't a lockout anymore - it still gives a stiff ride however the suspension works a bit? Maybe it has something to do with riding on rough roads with lockout enabled?

Sorry for asking so many questions

jimc101

Read the user service manual, follow the service instructions https://www.sram.com/service/rockshox/7,105

1337

well i just found that this fork isn't actually rockshox tora. It is 2009 suntour XCM V2 HLO 26'. I checked out the manual and it doesn't tell anything about fork maintenance.