Different Tires?
#1
Thread Starter
Junior Member
Joined: Dec 2011
Posts: 13
Likes: 0
Different Tires?
Hi,
I'm trying to transform my mountain bike into a cruiser bike(the mostly possible) and i have the following question:
Can i use 700cc tires on my 26" mountain bike? if not, why?
This are the tires i would like to use:
https://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
I'm trying to transform my mountain bike into a cruiser bike(the mostly possible) and i have the following question:
Can i use 700cc tires on my 26" mountain bike? if not, why?
This are the tires i would like to use:
https://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER
#2
Senior Member
Joined: Jun 2011
Posts: 100
Likes: 0
From: Durham, NC
Bikes: All-City Mr. Pink, Kona Jake CX, Niner ROS9
No those tires are closer to 29" inches. How about these? https://www.amazon.com/Kenda-Bicycle-...3968661&sr=1-1
Those will fit your 26" rims.
Those will fit your 26" rims.
#3
Senior Member

Joined: Aug 2011
Posts: 22,676
Likes: 2,642
From: CID
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Nope. MTB rims are 559mm in diameter, 700C wheels are 622mm diameter.
Narrow(er) and slick(er) 26" tires are available, and help a lot with rolling resistance. I used the Kenda/Sunlite City Slick 26x1.5" for a while, and Panaracer makes 26" Paselas in 1.25", 1.5", and 1.75" widths.
Narrow(er) and slick(er) 26" tires are available, and help a lot with rolling resistance. I used the Kenda/Sunlite City Slick 26x1.5" for a while, and Panaracer makes 26" Paselas in 1.25", 1.5", and 1.75" widths.
#5
Low car diet
Joined: Aug 2007
Posts: 2,407
Likes: 4
From: Corvallis, OR, USA
Bikes: 2006 Windsor Dover w/105, 2007 GT Avalanche w/XT, 1995 Trek 820 setup for touring, 201? Yeah single-speed folder, 199? Huffy tandem.
38mm = ~1.5", so look for 26 x 1.5" tires.
You can sometimes fit a 700c/29" rim with narrow tires on a frame/fork meant for wide 26" tires. (26 x 2.35" and 700c x 28mm tires have about the same 678mm diameter.) The major issue is brake reach and so this is easier when using disc or another hub brake.
But, I'd just go for 26 x 1.5" or so tires.
You can sometimes fit a 700c/29" rim with narrow tires on a frame/fork meant for wide 26" tires. (26 x 2.35" and 700c x 28mm tires have about the same 678mm diameter.) The major issue is brake reach and so this is easier when using disc or another hub brake.
But, I'd just go for 26 x 1.5" or so tires.
#6
Senior Member


Joined: Oct 2011
Posts: 10,043
Likes: 2,505
From: Fairplay Co
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Since the tire thickness is about the same on most of these tires the thorn resistance is about the same. If you shop around and spend a little more money you can get thorn resistant kevlar tires in smaller 26inch sizes.
#7
Senior Member


Joined: Apr 2009
Posts: 39,897
Likes: 3,865
From: New Rochelle, NY
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
You can't go to 700c without switching the wheels. And often that isn't an option either because of things like canti brake boss height, and/or overall fork clearance. In any case even if you can make the switch, it will raise the BB height another 3/4", which woin't be desirable in a cruiser.
However there is a vast selection of cruiser or city/slick road tires in the 26" size. After all 26" was the cruiser wheel size long before mtn bikes were invented.
However there is a vast selection of cruiser or city/slick road tires in the 26" size. After all 26" was the cruiser wheel size long before mtn bikes were invented.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#8
Senior Member
Joined: Jun 2011
Posts: 100
Likes: 0
From: Durham, NC
Bikes: All-City Mr. Pink, Kona Jake CX, Niner ROS9
26" tubes with scharader valves are easy to get some tire slime in. That would prevent flats, you could also use tire liners. Or Kevlar belted tires. But whatever you go with you need 26" not 700c.
#9
Junior Member
Joined: Dec 2011
Posts: 5
Likes: 0
Bikes: Cannondales several
Yep, the 26" slicks or city tires will help. Also consider some changes to your front chain rings and rear cassette cogs.
Bigger chain ring(s) in front will give you a faster top end speeds ....
What cassette cogs do you have in the rear ?
Bigger chain ring(s) in front will give you a faster top end speeds ....
What cassette cogs do you have in the rear ?
#11
Low car diet
Joined: Aug 2007
Posts: 2,407
Likes: 4
From: Corvallis, OR, USA
Bikes: 2006 Windsor Dover w/105, 2007 GT Avalanche w/XT, 1995 Trek 820 setup for touring, 201? Yeah single-speed folder, 199? Huffy tandem.
For a true cruiser look and feel, as others have mentioned, go with 26" tires that are thick (2"+) but relatively smooth.
#12
#13
Senior Member
Joined: May 2008
Posts: 679
Likes: 1
From: Calgary, Alberta
As has been mentioned already, you need 26 inch tires, but you do need the decimal size, not the fraction sizes. 26 x 1.25 are my favorite general commuting mb tires. The 26 x 1 1/4 are for the older style bikes before mbs. They are not the same size. The Sheldon site has a large page with detailed tire size info.





