What is the tool to adjust XTR 900 rear hub?
03-10-12 | 04:55 PM
#1
Thread Starter
Senior Member
Joined: Oct 2008
Posts: 335
Likes: 2
What is the tool to adjust XTR 900 rear hub?
It's got 4 small holes I assume for some sort of pin tool...somewhat like a Mavic hub? Anyway, does anyone know where to get such an old school tool? And does the hub only adjust from the non-drive side?
Thanks
Thanks
03-10-12 | 05:42 PM
#2
Senior Member
Joined: Sep 2004
Posts: 2,897
Likes: 2
From: boston, ma
looks like a classic cup and cone hub. use cone wrenches https://www.retrobike.co.uk/forum/vie...er=asc&start=0
03-10-12 | 06:57 PM
#4
Insane Bicycle Mechanic
Joined: Mar 2008
Posts: 10,167
Likes: 1,134
From: other Vancouver
XTR M900-series hubs were the very first XTR hubs that Shimano made. They used standard cone wrenches to adjust the bearings.
A picture would help identify the hub and which holes you are referring to.
A picture would help identify the hub and which holes you are referring to.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
