crankset compatability
09-01-13 | 07:14 AM
#1
Thread Starter
Newbie
Joined: Oct 2011
Posts: 42
Likes: 0
Bikes: S Works Aethos/Spec Roubaix/S Works Tarmac
crankset compatability
My BB is a threaded 68 mm English with a Megaexo FSA crank. I want to change it to a Dura ace and have a couple questions:
1. I'll probably go with a DA 9000, but will past models (7800, 7900) also work?
2. Is it necessary to change the BB bearing cup since I assume both are 24 mm spindles? If so, stick with DA cup or upgrade to a fancier ceramic type?
1. I'll probably go with a DA 9000, but will past models (7800, 7900) also work?
2. Is it necessary to change the BB bearing cup since I assume both are 24 mm spindles? If so, stick with DA cup or upgrade to a fancier ceramic type?
09-01-13 | 11:00 AM
#3
Thread Starter
Newbie
Joined: Oct 2011
Posts: 42
Likes: 0
Bikes: S Works Aethos/Spec Roubaix/S Works Tarmac
The present RD/FD are Dura ace 6800 with a 11-28 cassette on a 2008 Cervelo R3. I am considering up grading to either Ultegra Di2 or even 9070 over the winter. Thanks for any help/suggestions!
Thread
Thread Starter
Forum
Replies
Last Post
zeego
Bicycle Mechanics
2
08-13-14 10:55 PM
horizondesire
Road Cycling
16
12-14-11 06:20 PM
